PTL-CL-LED III
Coupling
Fig. 3
Connector Ring
Tighten
Loosen
3
2
Fig. 2
KCL-LED
2
1
ENGLISH GERMAN FRENCH SPANISH ITALIAN
SCL-LED
2.Setting
CAUTION
Fig. 1
·Do not connect or disconnect the hose or handpiece until air pressure has
completely stopped.
·Follow the instrument manufacturer’s instructions.
·This coupling can connect with a hose with light and ISO
Standard 4 hole.
(
Fig.1
)
If it connects with a hose without light
function, the light terminal will deform and it will become a
cause of failure.
Ensure the handpiece is attached tightly to the
coupling.
(
1
)
Connecting
1
)
To connect, align and insert carefully and firmly the pin of the coupling into the pin holes
of the hose, and fasen the hose nut securely.
Coupling cap as attached.
(
PTL-CL-LED/PTL-CL-LED III
)
Wrench (
KCL-LED,SCL-LED
) (
Fig.2
)
2
)
Insert handpiece into coupring straight until it click.
· There is no generation of heat in the light source, power saving and long life LED.
· It can adjust the amount of water by water adjustment ring.
(
PTL-CL-LED III, KCL-LED,
SCL-LED
)
· Power supply for illumination is regardless of polarity. You can use variety of unit.
· Non-Retraction Valve which prevents the water flow back of water is built in.
1. Features
CAUTION
To Next Page
Loading...