15
English
10. Holder
11. Care and Maintenance
11-1 Cleaning of Optic Fiber (Varios2 Lux)
Wipe the debris off the end of the Optic Fibers at the
handpiece with alcohol.
(
Fig. 20
)
11-2 Changing O-Ring
Handpiece Cord
An O-Ring is located in the Handpiece Cord Connector. Replace O-Ring in the groove.
(
Fig. 21
)
Optional O-Ring: Order Code D0310020080
10-1 Handpiece Holder
While the Handpiece is not in use, put the Handpiece on the Handpiece
Holder.
(
Fig. 18
)
Handpiece Holder
Fig. 18
10-2 Tip Holder (Option)
The Tip Holder is Autoclavable and hold up to 5 tips at
once. To Autoclave, tilt the tips in the direction of the
arrow in Fig. 19.
Fig. 20
Optic Fiber End Face
Tip Holder
Tip
Fig. 19
Fig. 21
O-Ring
NOTICE
• To prevent injury, always mount Scaler Tip Cover S.
NOTICE
• Do not use any sharp pointed tools to
clean the Optic Fiber End Face. In case
the light degradation, contact dealer.
To Next Page
Loading...
