Need help?Do you have a question about the NSU Quickly Normal and is the answer not in the manual?
Details of the light-alloy, air-cooled, two-stroke engine.
Petroil mixture ratio for engine lubrication.
Pressed steel frame construction and fuel tank capacity.
Description of handlebar levers and twist grips.
Operation of front/rear brakes and types of stands.
Tool box integrated into the front forks.
Guidance for the initial 200-400 miles of operation.
Recommended tyre pressures for safe operation.
Step-by-step instructions for starting the engine.
Advice on gear changes, throttle use, and braking.
Methods for cleaning the exterior and parts of the machine.
Schedule and methods for greasing and oiling components.
Steps for air filter cleaning and gearbox oil change.
Lubrication of levers, speedometer, pedal bearings, etc.
Instructions for adjusting front and rear brakes.
How to check and adjust drive chain sag.
Steps to remove front and rear wheels for service.
Guidance on fitting and removing wired-on low-pressure tyres.
Adjusting the play in the dekompression cable.
Adjusting gear mechanism and carburettor settings.
Sparking plug, timing, and contact breaker adjustments.
How to adjust the headlamp beam for visibility.
Procedures for engine decarbonisation and valve reseating.
Recommended inspection schedule and checks for the vehicle.
Chart detailing lubricants and schedule for routine lubrication.
Estimated times for various repair tasks based on flat rates.
Troubleshooting common engine starting and running problems.
To Next Page
General