Nu-Tek Levator Elite LE9011 User Manual

- Page 14 -
Nu-Tek Levator Elite User Manual
EMG mode operation
1. Using the circular button black arrow keys navigate to the EMG and press
the OK button, the screen will then display two modes: Assessment
Program or Training Program. Select mode and press the OK button to
enter the parameter mode.
2. After completing the settings, press the OK button to enter standby mode
of the vertical Bar graph (Patient Mode) or the EMG line graph
(Therapy Mode).
3. Press the OK button again to begin the session.
4. At the end of the session the screen will display the work/rest microvolt,
onset/relax time
5. There are two EMG custom programs for training purposes, all the
parameters can be adjusted by the patient or therapist in Therapy Mode.
6. If Assessment Program is selected, there is only one pre-set program
used, the user can view their progress on the LCD screen
Patient mode Therapy mode
Time:
Work Time: 04/05 Trial: 05/05
Mode:
:
T

Nu-Tek Levator Elite LE9011 Specifications

General

Brand	Nu-Tek
Model	Levator Elite LE9011
Category	Medical Equipment
Language	English