FCC
Compliance
Statement
Fe
Hereby, NuForce Inc. declares
that
this
device is In
compliance
with
the
limits
for
a Class 8
digital
device,
pursuant
to
part
15
of
the
FCC
Rules.
This equipment has been tested and found
to
comply
with
the limits for a
Class
B digital
device, pursuant
to
part
15
of
the
FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment uses and
can radiate radio frequency energy.
If
not
installed and operated in accordance
with
the
instructions, it may interfere with radio communications.
There
is
no guarantee that interference will
not
occur in a particular installation. If this
equipment does interfere
with
radio or television reception, the user may
be
able to correct
the problem
by
one
or
more
of
the following measures:
D Reorient
or
relocate the receiving antenna.
D Increase separation between equipment and receiver.
D Connect the equipment into
an
outlet on a circuit different
from
that
to which the receiver
is
connected.
D Consult the dealer
or
an experienced radio/TV technician for help.
WARNING: Only peripherals complying with the
FCC
class B limits may
be
attached to this
equipment.
Changes
or
modifications made to this equipment.
not
expressly approved by
us
or
parties
authorized
by
us
could void the user's
authority
to
operate the equipment. This device
complies
with
part
15
of
the
FCC
Rules.
Operation
is
subject to the following
two
conditions:
(1) This device may
not
cause harmful interference, and
(2)
this device must accept any
interference received, including interference that may cause undesired operation.
Notice
for
customers:
The
following
information
is
only
applicable
to
equipment
sold
in
countries
applying
EU
Directives.
EU
Declaration
of
Conformity
(€
Hereby, NuForce Inc. declares
that
this
device
is
in
compliance
with
the
essential requirements and
other
relevant
provisions
of
Directive
2004/108/EC.
The manufacturer
of
this product
is
NuForce. 382 South
Abbott
Ave,
Milpitas,
CA
95035,
USA.
The Authorized Representative for
EMC
and
product
safety
is
NuForce. 382 South Abbott
Ave,
Milpitas,
CA
95035.
USA.
For any service or guarantee matters please refer
to
the addresses given in separate service
or
guarantee documents.
For
customers
in
Europe
)t
Disposal
of
Old Electrical & Electronic Equipment (Applicable in
the
European Union and
other
European
countries
with
separate
collection
systems)
This symbol on the product
or
on its packaging indicates that this product shall not
be
treated
as
household waste. Instead
it
shall
be
handed over to the applicable collection point for the
recycling
of
electrical and electronic equipment.
By
ensuring this product
is
disposed
of
correctly, you will help prevent potential negative consequences for the environment and
human health. which could otherwise be caused by inappropriate waste handling
of
this
product. The recycling
of
materials will help
to
conserve natural resources.
For
more detailed
information about recycling of this product, please contact your local Civic Office, your
household waste disposal service or the shop where you purchased the product.
SAFETY
IN
STRUCTIONS
There are
two
categories of Safety Instructions included in this manual:
D Product Warnings. (i.e
..
what must never be done to assure avoiding those hazards that
could cause bodily injury or property damage)
D User Directions
(i.e
..
what must always be done
to
assure the safe
use
of
your device).
The Safety Instructions contained in this manual have been categorized in accordance
with
the seriousness
of
the potential hazards through the use of Signal Words. Those Signal Words.
and their intended meanings. are
as
follows:
DANGER
: Indicates that failing to observe the Safety Instructions could result in death or
catastrophic bodily injury.
WARNING: Indicates that failing to
to
observe the Safety Instructions could result in serious
bodily injury.
CAUTION: Indicates
thatfailing
to
observe the Safety Instructions could result in minor bodily
injury
or
property damage.
NOTE
: Designates
important
information
that
relates to activities and/or conditions that
might
result
in
loss of data and/or damage
to
your device.
Safe
Use
and
Operation
of
Your
Device
This equipment emits stray
RF
energy and will interfere with the reception
of
signals by
airborne electronic navigational devices or medical devices.
Do
not operate this equipment
near any sensitive medical devices.
WARNING:
Use
only grounded
AC
power cords.
Always immediately disconnect the power to the equipment in the event the device emits
an
unusual odor or sound
or
generates smoke.
WARNING : Never attempt
to
disassemble, repair
or
make any modification to your device.
Disassembly. modification or any
attempt
at repair could cause bodily injury
or
property
damage,
as
well
as
damage
to
the device itself.
WARNING
:Your
device
is
not a toy. Never allow children to play with your device. Misuse.
rough
or
improper handling
of
your device
by
children could result in serious bodily
injury
for
any
of
the enumerated safety warnings in this manual.
In
addition. always keep all accessories
and components
out
of
the reach
of
small children
as
small parts might present a choking
hazard. Seek immediate medical attention
if
choking occurs or if any small part has been
swallowed.
CAUTION : Never raise the sound volume level
too
high when using your device with
earphones.
An
excessive sound volume level could cause damage
to
your hearing.
WARNING:
To
reduce the risk
of
fire
or
electric shock. do not expose the unit to moisture or
water.
Do
not
allow foreign objects to get
into
the enclosure. If the
unit
is
exposed to moisture. or a
foreign object gets into the enclosure, immediately disconnect the power cord from the wall.
Take
the
unit
to a qualified service person
for
inspection and necessary repairs.
Read
all the instructions before connecting
or
operating
the
component.
Keep this manual
so
you can refer
to
these safety instructions.
Heed all warnings and safety information in these instructions and on the product itself.
Follow all operating instructions.
Do
not
use this unit near water.
Allow for a minimum 10
em
or
4 inches
of
unobstructed clearance around the unit.
Do
not
place the
unit
on a bed. sofa. rug. or similar surface capable
of
blocking ventilation openings.
If the
unit
is
placed in a bookcase or cabinet. allow
for
proper ventilation.
Keep
the component
away from radiators. heat registers, stoves,
or
any
other
appliance that produces heat.
If the
unit
requires a power supply:
D It must
be
connected
to
a power supply only
of
the type and voltage specified on the rear
panel.
D Connect the component to the power
outlet
only with the supplied power supply cable
or
an
exact equivalent.
Do
not
modify
the supplied cable.
D
Do
not
route the power cord where
it
will
be
crushed, pinched, bent. exposed
to
heat. or
damaged in any way.
Pay
particular attention to the power cord at the plug and where
the cord exits the back
of
the unit.
D The power cord should
be
unplugged
from
the wall
outlet
during a lightning storm or
if
the
unit
is
to
be
left unused for a long period
of
time.
Immediately stop using the component and have
it
inspected and/or serviced by a qualified
service agency
if
:
D The power supply cord
or
plug has been damaged.
D Objects have fallen
or
liquid has been spilled into the unit.
D The unit has been exposed
to
rain.
D The unit shows signs of improper operation.
D The unit has been dropped
or
damaged in any
way.
1
To Next Page
Loading...
General