NOTE: SHIFT button is used with other buttons that have shift modier functions.
# Mixtrack Quad Control Serato DJ Function Shift Function
1 FX UNIT See DJ FX section
2 PERFORMANCE PADS See Performance Pads section
3 FILTER Adjust beats multiplier
4 LOAD A Load track to left deck
5 CUE GAIN Adjust headphone volume
6 BROWSE Turn to browse through open panel. Push to cycle forwards through
open panels
Push to cycle backwards through open panels
7 CUE MIX Mixes between the headphone cue and master output
8 MASTER GAIN Adjust master ouput level
9 LOAD B Load track to left deck
10 CHANNEL EQ Bass, Mid, Treble channel equalizers
11 PITCH BEND Use to nudge the pitch up or down. This will slightly speed or slow
down your track temporarily.
SHIFT + KEYLOCK toggle keylock ON/OFF.
SHIFT + RANGE toggles pitch range.
12 PITCH FADER Adjust tempo of playing track When in Sync mode, used to disable the Pitch
Fader temporarily and change the zero position
13 LAYER Use to swap the deck layer so you can control decks 3 & 4 Use in conjunction with performance pads to
change the lighting on your platters
14 PLATTER Touch the top to scratch or jog. Moving the outside of the wheel will jog
15 STUTTER Stutter play
16 PLAY/PAUSE Play/Pause track
17 CUE Jump to start of track (more than 2 Sec elapsed) Previous track (less
than 2 sec elapsed)
18 SYNC Sync on Sync Off (Press twice to return to Absolute
Pitch when in Relative Mode)
19 SCRATCH Toggle between Scratch or Jog
To Next Page
Loading...
Need help?
General
