EasyManuals Logo
Home>Numark>MP3 Player>MP302

Numark MP302 User Manual

Numark MP302
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
BEAT MATCHING USING PITCH BEND
If you find the BPM’s (Beats Per Minute or Tempos) are the same, however, the drum beats are not matched you will need to
temporarily change the pitch. The illustration below shows how to match the beat of PLAYER 2 to the beat of the music being
played on PLAYER 1. (This procedure can be done on either PLAYER).
After matching the BPM’s adjust the pitch temporarily as follows:
When PLAYER 2 is ahead, rotate the jog wheel counter clockwise. When PLAYER 2 is behind, rotate the jog wheel clockwise.
The pitch changes automatically while the jog wheel is rotated. The faster you rotate the wheel the more you change.
Releasing the wheel results in a return to the original pitch (so the BPM’s are once again the same).
EXAMPLE OF MIXING USING BOTH PLAYERS OF YOUR CD PLAYER
While playing a disc on PLAYER 1, load a disc into PLAYER 2 and select your next track, match its pitch to the track playing on
PLAYER1 and when you are ready use the crossfader on your mixer to fade from PLAYER 1 to PLAYER 2.
PLAYER 1
Load a disc and press the
OPEN/CLOS E button.
PLAYER 2
Load a disc and press the
OP EN/CLOSE button.
PLAYER 2
Press the Pause button of PLAYER 2.
PLAYER 2
Listen with the monitor and
press the play button.
PLAYER 2
With a matching downbeat from
Player 1 press the play button.
P LAYER 1
Sele ct the track to be played.
P LAYER 2
Sele ct the track to be played.
P LAYER 2
Rapidly search for a cue point using
the outer wheel
PLAYER 2
Pressthecuebuttonthenplaytobe
sure of the set cue point.
P LAYER 2
If you are beat mixing, turn on your
Pitch a djus t a nd follow the directions
for beat matching.
Load a disc in PLAYER 1 and
select the track and press PLAY.
Load a disc in PLAYER 2 and
select the track then play.
Set and edit a start cue point on
PLAYER 2
Check your new cue point
Do a MIX!
PLAYER 1
Press the PLAY button
PLAYER 2
Press the PLAY button
PLAYER 2
Slowly set the right cue point
using the inner wheel
PLAYER 2
Reset the player to the Cue point
by pressing Cue
MIXE R
When you are happy with your mix
move the cros s fade r a ccordingly.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Numark MP302 and is the answer not in the manual?

Numark MP302 Specifications

General IconGeneral
BrandNumark
ModelMP302
CategoryMP3 Player
LanguageEnglish

Related product manuals