Welcome
Thank you for choosing Numera Libris 2.
This user guide provides key information about Libris 2, including Important
Safety Information. Please review it carefully and keep it nearby for reference.
If you have questions that are not addressed in the user guide, please call
your customer service number.
Some features and audio prompts described in this User Guide may
not apply to your device. Device settings vary by Service Provider.
About Libris 2
®
Libris 2, a personal mobile responder, is cellular-enabled and designed to
provide you personal emergency response services whether you are at home,
away from home, and even in the shower or bath.
The Libris 2 device is available with the optional Numera service “EverThere
®
”,
which allows the user, his/her family, or other support network to receive
alerts for emergency events and track the user via GPS. Talk to your Service
Provider about whether EverThere
®
service is right for you.
Libris 2 can be activated by:
• Pressing the Libris 2 Call Button.
• Detecting a fall while wearing the Libris 2 (if this option is enabled).
When activated, Libris 2 will automatically call and allow you to speak with
your Service Provider response team and provide information about your
location. Your Service Provider response team can then notify emergency
services for you, if needed.
Box Contents
Belt Clip
Cradle
Important Safety Information
FOR PROPER OPERATION, LIBRIS 2 REQUIRES ADEQUATE CELLULAR
COVERAGE! POOR CELLULAR COVERAGE MAY RESULT IN THE
INABILITY TO PLACE A CALL OR AUTOMATICALLY DETECT A FALL!
Check with your Service Provider for known coverage limitations.
To reduce risk of strangulation, the Libris 2 Lanyard is designed to
break apart under certain conditions. Any cord worn around the neck,
however, can pose a risk of strangulation, including the possibility
of serious injury and death. Libris 2 users and caregivers should
exercise care with the Lanyard to ensure it does not get caught or
tangled in wheelchairs, walkers and other such equipment.
The battery in Libris 2 is not designed to be removed or replaced.
Battery tampering carries an inherent risk of explosion. Do not tamper
with, replace or manipulate the Libris 2 or battery in any way.
As with all location-based services, it may not always be possible to
determine your location. Multi-level buildings, parking garages, and
even dense urban areas can make it difcult for satellites and cell
phone towers to determine your exact location.
In an emergency, please provide your Service Provider response team
with as much information as possible about your location.
Libris 2 is not a replacement for regular contact with caregivers or
access to an alternative means of placing an emergency call.
While the fall detection system performs well, no such system is 100%
reliable. If you experience a fall that causes actual or potential injury,
do not wait for the automatic call. You should always press the Call
Button manually in an emergency if you are able.
Libris 2 requires adequate battery charge for proper operation. Low
battery may result in the inability to place a call, automatically detect
a fall, and/or properly locate you automatically during an emergency.
See below for more information regarding the battery indicator and
proper testing.
Libris 2 is designed to be water-resistant, not waterproof. Usage
other than as directed may result in the inability to place a call,
automatically detect a fall, and/or properly locate you automatically
during an emergency.
Use only the Numera-provided Cradle and Power Cord. Keep the
Cradle and Power Cord in good condition and located where they do
not pose a safety hazard. Failure to use Numera’s Cradle and Power
Cord may interfere with system performance.
Test this System weekly. Test this System weekly to ensure the
equipment is working properly.
User Guide
Libris 2
®
Overview
1. Cellular Indicator shows cellular signal strength.
2. Battery Indicator, which surrounds the Call Button, shows battery status.
3. Call Button, when pushed, initiates a two-way call to your Service
Provider response team.
4. Speaker allows you to hear your Service Provider response team.
5. Microphone allows Service Provider response team to hear you. It is
placed 2/3 up the right hand side of the front face.
6. Clip Lock enables you to afx a Lanyard Clip or Belt Clip.
7. Charging Pins connect Libris 2 to the Cradle (be sure to keep these
pins clean and free of debris).
Cradle Overview
1. Cradle is for holding Libris 2 while charging.
2. Charging Pins connect Cradle to the Libris 2 (be sure to keep these
pins clean and free of debris). Press tabs inward to remove the
Portable Charger Adapter.
3. Power Port is where the low voltage connector of the Power Cord
connects to the Cradle. Insert the power cord into the slot in the cradle.
4. Power Cord connects the Cradle’s Power Port to a USB port or
standard wall outlet using the power plug adapter. Feed the cord
through the slot under the cradle.
Using the Portable Charger Adapter
1. If not attached, attach the portable
charger adapter to the charging
end of the power cord.
2. Rest the Libris 2 on the portable
charger adapter. The magnetic
pins will secure the Libris 2 unit to
the charger.
3. Connect the power cord to a
USB port or standard wall outlet
using the power plug adapter.
The Call Button will ash
alternate colors while charging.
Activation and Set Up
Step 1: Activate Libris 2
1. Place Libris 2 into the Cradle. While
charging, the Cellular and Battery Indicators
will be on and show your current cellular
signal strength and level of battery charge.
2. Libris 2 should automatically turn on when
placed in the Cradle, and it will play an audio
message indicating it is ready for its rst
use: “We are activating your personal mobile
responder. We will notify you when activation
is complete.” Libris 2 will automatically
receive any updates and, once activated
on the cellular network, may take up to a
minute for Libris 2 to restart.
3. Libris 2 should then play an audio
message: “This personal mobile
responder will notify your response team
when it detects a fall. With one touch of
the Call Button your response team will
be available to assist you and will pinpoint
your location so help can reach you.”
Step 2: Call to Complete Set Up
1. To register your personal mobile
responder with your Service Provider
response team, Libris 2 will say:
“It’s time to meet your response
team. Please press and hold the
Call Button down to connect to your
response team now.”
2. With Libris 2 in the Cradle, press and hold the Call Button until Libris 2
initiates the call. Libris 2 can remain in the Cradle during the call to your
Service Provider response team.
3. Listen for the audio message: “Calling your response team now.”
4. When you complete the call with your Service Provider response team,
Libris 2 will be set up.
Important: Libris 2 is not ready for use until you have completed the
set up call with your Service Provider response team and, following
that call, have charged Libris 2 in the Cradle for 4 hours.
✎ Note: If Libris 2 does not power on and begin the activation
process or cannot detect a cellular network, call your Service
Provider’s customer service.
Cellular Indicator
The Cellular Indicator on top of Libris 2 shows cellular signal strength.
• When the Cellular Indicator is green, Libris 2 has a strong signal.
• When the Cellular Indicator is amber, Libris 2 has a moderate signal.
• When the Cellular Indicator is red, Libris 2 has a poor signal. Move to an
area where you get a cellular signal. Libris 2 will not function properly
without an adequate cellular signal.
Cellular Indicator Strength*
Green Strong
Amber Moderate
Red Poor Signal
*A cellular signal may not be available in all areas.
Battery Indicator
The Battery Indicator, which surrounds the Call Button, shows the level of
battery charge.
• When the Battery Indicator is green, Libris 2 adequately charged.
• When the Battery Indicator is amber, Libris 2 is moderately charged.
• When the Battery Indicator is red, the battery charge is low, consider
charging soon.
Battery Indicator Status* Action Required
Green Good No action needed
Yellow Moderate Consider charging
Red Low Charge soon
*The Libris 2 battery is designed to operate on a single charge for 36 hours
but may be reduced as a result of user activity, cellular coverage, talk time,
device-specic settings, and device life.
Important: Libris 2 requires an adequate battery charge to function
properly. Prior to use, please charge Libris 2 at least 4 hours. We
recommend charging the device each night.
Indicator Light Settings
The cellular and battery indicator light settings may be congured by your
Service Provider to ash at a regular interval.
Wearing Libris 2
®
Libris 2 can be worn on a belt using the Belt Clip, or as a pendant around your
neck using the Lanyard Clip. Although the Libris 2 can be worn inside clothing,
be advised it may be difcult to reach help button in an emergency. Talk to your
health care provider regarding the most effective way to wear your Libris 2.
Use only the Numera-provided Lanyard. To reduce risk of strangulation,
the Libris 2 Lanyard is designed to break apart under certain
conditions. Any cord worn around the neck, however, can pose a risk
of strangulation, including the possibility of serious injury and death.
Libris 2 users and caregivers should exercise care with the Lanyard
to ensure it does not get caught or tangled in wheelchairs, walkers
and other such equipment.
Important: Libris 2 requires a vertical position with the Call Button
facing away from the body to operate properly.
Attaching Belt Clip or Lanyard Clip
1. Align the notched side of the Clip with the notched area on the back.
2. Press inward until the Clip notches are nested within the Libris 2
notches.
3. Firmly push the Clip toward the top of the device. It is secure when you
hear a click or you can no longer see the notches on the Clip.
Removing the Clip
1. Hold Libris 2 in your hand as shown, with
the Call Button facing the palm of your
hand.
2. Forcefully push downward on the Clip with
your thumb to open.
Turning On and Off
To turn Libris 2 on, press the Call Button and hold it until the Battery
Indicator ashes. Libris 2 will play music while it starts up. Once connected,
Libris 2 will play a message: “Your personal mobile responder is ready.”
Placing Libris 2 into the Cradle will turn it on automatically. Start-up audio
prompts are silenced while this function is carried out in the Cradle.
To turn Libris 2 off, press the Call Button twice, holding down the second
press for 7seconds until Libris 2 plays a message announcing that you
have requested to turn it off. It will ask you to conrm by pressing the Call
Button one more time. If done correctly, Libris 2 will play the following
message: “Powering off now. Good bye.”
Note: When you rst receive Libris 2, leave it in the Cradle for 4
hours in order for the system to operate.
Breakaway
Lanyard Clip
PRINTER’S INSTRUCTIONS: INSTRUCTIONS, USER GUIDE, LIBRIS 2; P/N: 10026230 C; MATERIAL: 80GSM WOOD FREE PAPER; INK: BLACK & PMS 032 (RED); SIZE: FLAT 19.000” x 17.000” FOLDED: 4.750” x 2.833”; FOLDING: MAP FOLD TO 4.750” x 2.833”; TOLERANCE ± .125”; SCALE: 1-1; SIDE 1 OF 2
Libris 2
®
Cozy
To Next Page
Need help?
General