INSTRUCTIONS (STORAGE UNIT)
• Slide the 2x bottom sections (1) and top section (2) into the
left side section (3) as shown
• Carefully position right side section (4) in line with assembly
and attach firmly
• Position completed structure onto bottom plate (5)
• Do not apply excessive force when attaching sections. They
should slide together with relative ease.
STACKING TOWER ASSEMBLY
Please note - requires purchasing of additional tower units
• When assembling the top tower, insert the bottom
connector section (6) into the slot inbetween the 2x bottom
sections (1)
• When assembling the bottom tower, rather than using the
top section (2), use the top connector section (7)
• Complete the stacking by placing the top tower above the
bottom tower, then sliding bottom connector (6) on the top
tower into place on the top connector (7) on the bottom
tower.
To Next Page
Loading...
