Nuvita 1300 - Digital baby scale
EN
1. Description
3. Batteries installation
6. Unit selector function
7. Funzione COMPARISON ( )
4. Normal weighing function
NOTE
2. Specications
ON/OFF button
View baby's weight and other information
on how
[TARE] button Switch ON or OFF the scale.
[Kg / lb:oz] button Allows you to deduct initial tare weight.
button Allows you to change weight unit
Tasto
Allows you to use COMPARISON function,
explained in this manual.
Range: from 0,02 Kg to 18 Kg / from 1 oz
to 40 lbs
Graduation: 5 gr. / 5 oz
Power supply: 2 x batteries AA (3,0 VDC)
Battery indicator: Battery icon will ash “ ” if battery
power is down.
Display: Backlighted LCD panel.
Display dimensions: 69 x 32,5 mm
Dimensions: 540 x 345 x 57 mm
Net weight: 1,95 Kg
Storage environment: -10°C – 55°C
Operating environment: 10°C – 40°C
0.2kg-3.995kg (0.005kg)
Precision of weight
measurements:
4kg-9.995kg (0.010kg)
10kg-18kg (0.015kg)
Turn the scale and remove the battery cover which is located at
the bottom.
Insert two standard batteries size AA being sure to observe the
polarity indicated in the battery compartment
Close the batteries cover and place the scale on a at and hard
surface to weight the baby. Carpet of soft surface is not suitable
for weighing.
Before putting a baby on the scale, be sure that the surface of the
scale is completely dry and not slippery.
Press “ ” to switch ON the scale.
Before putting the baby onto the scale, press [Kg/lb:oz] button to
select the weight unit.
Determined weight unit will show when the scale is switched ON
next time.
This feature allows you to weigh the amount of milk or food
given to the baby during meals.
After feeding the baby, press “ ”
button once to switch ON the scale.
Four bars and battery icon will show and
change to g.7.4.appariranno quattro
trattini.
The weight of the baby before feeding
will show.
(NOTE: This is a minus gure)
Since a baby is a moving object, the weight on the display will
uctuate during weighing process. It will take 15 seconds for the
scale to catch a weight of the moving baby and lock it. The locked
weight will show 10 seconds and then the scale will switch o
automatically).
Press “ ” button to switch ON the scale.
Four bars and battery icon will show and
change to g.4.2.
“0.000 Kg” and battery icon will show.
“0:0 lb:oz” will showif this uniti s selected.
Place the blanket on the scale. Weight of
the blanket will show.
When “Hold” appears press the [TARE]
button immediatly.
“0.000 Kg” (0:0 lb:oz will show if this uniti s
selected), TARE and battery icons will show.
NOTE: Leave the blanket on the scale. If
you remove the blanket from the scale, the
display will show a negative weight.
Put the naked baby onto the blanket. Net
weight of the naked baby will show when
“Hold” appears. The scale will switch o
automatically after 10 seconds.
“0.000 Kg” and battery icon will show.
“0:0 lb:oz” will show if lb:oz uniti s
selected.
Put the baby onto the scale. The weight is
determined when “Hold” appears.
“Err” will show if the scale is overloaded.
Press “ ” button to switch ON the scale.
Four bars and battery icon will show and
change to g.5.2.
1.
2.
3.
4.
1.
2.
3.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
2.
3.
4.
1.
Fig. 4.1
Fig. 4.2
Fig. 4.3
Fig. 4.4
Fig. 5.1
5. TARE function
This feature allows you to weigh and to exclude the weight of any
tissue or blanket placed on the scale when weighing the baby
naked.
Fig. 5.2
Fig. 5.3
Fig. 5.4
Fig. 5.5
Fig. 5.6
Fig. 5.7
Fig. 7.3
Fig. 7.4
To Next Page
General