Need help?Do you have a question about the nVent RAYCHEM ETS-05 and is the answer not in the manual?
Description of the thermostat enclosure and its housing.
Details on cable entry points and their specifications for wiring.
Information about the connection terminals for the temperature sensor.
Specifications for power and heat tracing terminal blocks.
Description of the alarm relay functionality and associated terminals.
Explanation of the temperature setting dials and their operation.
Details on connecting the power terminals in the wiring diagram.
Details on connecting the sensor terminals in the wiring diagram.
Wiring information for the alarm relay functionality.
Wiring connections for the heating cable.
Configuration options for fail-safe operation using link 3-4.
Details on ambient sensing and line sensing thermostat versions with their ranges.
Specifications for different voltage input ranges available for the thermostat.
Information on ATEX, IECEX, and UKEX approvals for the thermostat.
Descriptions of optional features like Earth Plate and Alarm Relay.
Description of power terminal connections and electrical configurations.
How to select sensor types and configure failure modes using terminals.
Explanation of the alarm relay states and associated wiring.
Specifications for the voltage and current handling capabilities of the thermostat.
Instructions for installing the enclosure for line-sensing thermostats.
Instructions for installing the enclosure for ambient sensing thermostats.
Recommendations for optimal placement of the temperature sensor on pipes.
Procedures for securely attaching the temperature sensor to the pipe.
General| Type | Electronic Thermostat |
|---|---|
| Frequency | 50/60 Hz |
| Control Type | On/Off |
| Mounting | Wall mount |
| Humidity Range | 0% to 95% RH (non-condensing) |
| Enclosure Rating | NEMA 4X |
| Weight | 0.6 kg (1.32 lbs) |
| Wiring | Screw terminals |
| Control Output | Relay |
To Next Page
