52 | nVent.com/ERICO
Inline Coupling
Purpose designed coupling to clamp FRP to aluminum lower
mast, providing guy anchoring points and downconductor exit
point.
Max. Clamping diameter: mm (
Max. Clamping torque: kg/cm ( in.lb)
Weight: . kg ( ¼ lbs.)
Height added to mast: mm (
Lightning Event Counter (LECV)
Purpose designed lightning event counter.
I.P. Rating: IP, NEMA
Operating Temp. Range: –°C to +°C (-°F to °F)
Dimensions: mm(h) x mm(w) x mm(d),
. in(h) x . in(w) x . in(d)
Weight: . kg, . lb
Terminal Lug Coupling
The terminal lug coupling allows for connection of a conventional
downconductor such as mm x mm copper tape / bar to
the Dynasphere. See Upper Termination Instructions for fixing of
coupling to Dynasphere.
Material: Brass Alloy D
Length: . mm (
in.)
Weight: grams (. oz.)
Diameter: . mm ( in.)
Purpose designed guying kits for anchoring from a guy ring or
inline coupling. Each kit comes complete with six stainless steel
thimbles, plus guying grips per kit. Refer to pages and
for more detail.
4 m Guy Kit 7 m Guy Kit
Guy Diameter: mm (
in.) mm (
in.)
Actual Guy Length: m ( ½ ft.) m ( ft.)
Guy Tensile Strength: kg ( lb.) kg (
To Next Page
Loading...
Need help?
General