nvent Raychem Raystat-M2 - Page 7

nVent.com | 7
Fault codes
If faults occur, the thermostat disables all outputs and ceases to operate until the fault has been remedied.
TEMP LED flashes red:
Temperature sensor (RayStat-M2-G-Sensor/RayStat-M2-A-Sensor) has been disconnected or short-circuited.
RELAY LED flashes red:
Heating element in sensor (RayStat-M2-G-Sensor/RayStat-M2-R-Sensor) has been short-circuited.