Ethernet Networking Interfaces
The network ports of the ConnectX®-6 Dx adapter card are compliant with the IEEE 802.3 Ethernet
standards listed inFeatures and Benefits. Ethernet traffic is transmitted through the networking
connectors on the adapter card.
PCI Express Interface
The table below describes the supported PCIe interface in ConnectX®-6 Dx adapter cards.
Supported PCIe Interface Features
PCIe Gen 3.0/4.0 (1.1 and 2.0 compatible) through x16
edge connectors
Link Rates: 2.5. 5.0, 8.0 or 16GT/s.
Auto Negotiation to: x16, x8, x4, x2 or x1.
Support for MSI/MSI-X mechanisms.
Networking Ports LEDs Interface
There are two I/O LEDs, LED0 and LED1, per port to indicate speed and link status. LED0 is a bicolor
(yellow and green) LED, and LED1 is a single color (green) LED.
Link Indications
LED and State Description
1Hz blinking Yellow Beacon command for locating the adapter card
The adapter card includes special circuits to protect from ESD shocks to the card/server
when plugging copper cables.
To Next Page
Loading...
