Nvidia ConnectX-6 Dx MCX623432AE-ADAB - Specifications; MCX623432 AE-ADAB; MCX623432 AN-ADAB; MCX623432 AC-ADAB; MCX623432 AS-ADAB Specifications

60
Specifications
MCX623432AE-ADAB / MCX623432AN-ADAB /
MCX623432AC-ADAB /MCX623432AS-ADAB Specifications
Physical
Form Factor: Small Form Factor (SFF) OCP 3.0
Size: 4.52 in. x 2.99 in (115.00mm x 76.00mm)
Connector: Dual SFP28 Ethernet (copper and optical)
Retention Mechanism: Thumbscrew(Pull Tab) Bracket
Protocol
Support
Ethernet: 25GBASE-R, 20GBASE-KR2, 10GBASE-LR, 10GBASE-ER, 10GBASE-CX4, 10GBASE-KX4,
10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR
Data Rate: Ethernet 1/10/25 Gb/s
PCI Express Gen 4.0: SERDES @ 16.0GT/s, 16 lanes (2.0 and 1.1 compatible)
Power and
Environmen
tal
Voltage: 3.3VAUX, 12V
Power Cable Type Active Mode Standby Mode
Typical Power
(b)
Passive
Cables
15.7W 3.8W
Maximum Power Passive
Cables
19.74W 7.95W
Maximum power available through SFP28 port:1.5W
Temperature Operational 0°C to 55°C
Non-
operational
-40°C to 70°C
Humidity
90% relative humidity
(c)
Altitude
(Operational)
3050m
Environmen
tal
Airflow
Cable Type Hot Aisle
HSK to Port
Cold Aisle @35C
Port to HSK
Active
Mode@55C
Standby
Mode@45C
Active
Mode
Standby
Mode
Install the ConnectX-6 Dx OCP 3.0 card in a PCIe slot that is capable of supplying the power
levels mentioned below for the appropriate use case

In Standby mode only port0 is available.
