Nvidia DGX H100 - Confirm Necessary Screws and Washers

NVIDIA DGX H100 Service Manual
18.4. Conrm Necessary Screws and Washers
These items are in the rack mount kit box with the rack mount kit All these components should have
been removed from the previous installation
Note: front screws are dierent from the screws used for the back of the rack mount kit. If the
correct screws are not used in the front, the server will not be ush when pushed against the rack and
it will be dicult to secure the other eight captive screws.
Make sure all cage nuts are removed from the rack, as they will be needed to install the rack mount kit
at its new location.
18.4. Conrm Necessary Screws and Washers 111