Nvidia Quadro RTX User Manual

5 Remove the existing graphics card if present. If a
retention bar is holding the card in place, remove
the screw securing the card. OR, If there is no
existing graphics card, remove the access covers
from the primary x16 PCI slot.
The Quadro RTX 4000 is a single slot
GPU and will only require removing
one PCI x16 slot cover. The Quadro
RTX 8000, RTX 6000, and RTX 5000
are dual-slot GPUs and will require
removing two adjacent slot covers.

Nvidia Quadro RTX Specifications

General

Architecture	Turing
VR Ready	Yes
CUDA Cores	Varies by model
Tensor Cores	Varies by model
RT Cores	Varies by model
GPU Memory	Varies by model
Memory Interface	Varies by model
Memory Bandwidth	Varies by model
Maximum Power Consumption	Varies by model (e.g., RTX 4000: 160W, RTX 5000: 265W, RTX 6000: 295W, RTX 8000: 295W)
Output	DisplayPort
Base Clock	Varies by model
Boost Clock	Varies by model
TDP	Varies by model (e.g., RTX 4000: 160W, RTX 5000: 265W, RTX 6000: 295W, RTX 8000: 295W)
Max Resolution	7680 x 4320 at 60Hz
NVLink	Supported on RTX 5000, RTX 6000, and RTX 8000