Need help?Do you have a question about the Nvidia RTX 4000 and is the answer not in the manual?
General| Power Connectors | 1x 8-pin |
|---|---|
| Max Resolution | 7680 x 4320 @60Hz |
| OpenGL Support | 4.6 |
| VR Ready | Yes |
| Outputs | 4x DisplayPort 1.4 |
| Form Factor | Single Slot |
| DirectX Support | 12 |
Specifies the required motherboard slot type for installation.
Lists compatible operating systems and Linux distributions.
Details the necessary processor types and minimum versions.
Defines RAM needs relative to GPU memory capacity.
Outlines all accessories provided with each NVIDIA RTX Ada Generation graphics card model.
Remove previous graphics drivers from the host system before installation.
Safely shut down the computer and disconnect power before proceeding.
Disconnect the system from the AC power source.
Remove the system's side panel to gain access to the motherboard.
Detach any existing graphics card or clear the PCIe slot.
Insert the new GPU into the primary x16 PCI Express slot securely.
Fasten the installed graphics card to the system chassis with screws.
Connect the auxiliary power cable to the graphics card's power input.
Put the system's side panel back in place to complete hardware setup.
Attach display cables from the GPU to your monitor(s).
Plug the system's power cord back into the workstation.
Power on the computer and log in with administrator privileges.
Obtain the latest graphics driver from the NVIDIA website.
Run the driver installer and follow on-screen instructions.
To Next Page