NXP Semiconductors FS4500 - 4 Board Description; Board Features; Board Overview; Tab. 1. Evms Supporting the Fs45 Xx;Fs65 Xx Family

NXP Semiconductors FS4500/FS6500 evaluation boards
KTFRDMFS4500-FS6500EVMUG
FS4500/FS6500 evaluation boards All information provided in this document is subject to legal disclaimers. © NXP B.V. 2017. All rights reserved.
User guide Rev. 4.0 — 12 June 2017
5 / 34
4 Board description
4.1 Board overview
The FRDMFS4503CAEVB, FRDMFS6523CAEVB and FRDMFS6522LAEVB are
hardware evaluation tools supporting system designs based on NXP’s FS4500 and
FS6500 product families. The EVM allow testing the devices as an integral part of
the overall system being developed. They provide access to all FS45xx and FS65xx
functions (SPI, IOs) and support functional modes such as debug, normal, buck and
boost.
Table 1. EVMs supporting the FS45xx/FS65xx family
EVM name Supported silicon Options
FRDMFS6522LAEVM MC33FS6522LAE CAN, LIN, No FS1b, V
CORE
DC/DC 2.2 A
[1]
FRDMFS6523CAEVM MC33FS6523CAE CAN, FS1b, No LIN, V
CORE
DC/DC 2.2 A
[1]
FRDMFS4503CAEVM MC33FS4503CAE CAN, FS1b, No LIN, V
CORE
LDO 500 mA
[1] The FRDM board is limited to 1.5 A
4.2 Board features
The main features of the FRDMFS6522LAEVB, FRDMFS6523CAEVB and
FRDMFS4503CAEVB evaluation boards are:
• VBAT power supply connector
• VCORE configuration:1.3 V
• VCCA configuration: 3.3 V, using internal PMOS
• VAUX configuration: 5.0 V
• Buck or boost setting
• DFS configuration
• Ignition key switch
• CAN bus
• LIN bus (FRDMFS6522LAEVM only)
• FS0B
• FS1B (FRDMFS6523CAEVM or FRDMFS4503CAEVM only)
• IO connector (IO_0 to IO_5)
• Connectivity to KL25Z Freedom board (Access to SPI bus, IOs, LIN digital, RSTB,
FS0B, INTB, Debug, MUX_OUT, Regulators)
• LEDs that indicate signal or regulator status