Chapter 30
EzPort
30.1 Overview
NOTE
For the chip-specific implementation details of this module's
instances, see the chip configuration information.
The EzPort module is a serial flash programming interface that enables In-System
Programming (ISP) of flash memory contents in a 32-bit general-purpose
microcontroller. Memory contents can be read/erased/programmed from an external
source, in a format that is compatible with many standalone flash memory chips, without
requiring the removal of the microcontroller from the system board.
K22F Sub-Family Reference Manual, Rev. 4, 08/2016
NXP Semiconductors 681
To Next Page
Loading...
