│ Type :
boolean
│ Prompt: TSN Support for NXP ENETC
driver
│
Location:
│ -> Device
Drivers
│ -> Network device support (NETDEVICES
[=y])
│ -> Ethernet driver support (ETHERNET
[=y])
│ -> Freescale devices (NET_VENDOR_FREESCALE
[=y])
│ Defined at drivers/net/ethernet/freescale/enetc/Kconfig:
41
│ Depends on: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_FREESCALE [=y] && FSL_ENETC [=m] &&
TSN [=y]
│ Symbol: FSL_ENETC_PTP_CLOCK [=y]
│ Type : tristate
│ Prompt: ENETC PTP clock driver
│ Location:
│ -> Device Drivers
│ -> Network device support (NETDEVICES [=y])
│ -> Ethernet driver support (ETHERNET [=y])
│ -> Freescale devices (NET_VENDOR_FREESCALE [=y])
│ Symbol: FSL_ENETC_HW_TIMESTAMPING [=y]
│ Type : boolean
│ Prompt: ENETC hardware timestamping support
│ Location:
│ -> Device Drivers
│ -> Network device support (NETDEVICES [=y])
│ -> Ethernet driver support (ETHERNET [=y])
│ -> Freescale devices (NET_VENDOR_FREESCALE [=y])
| Symbol: MSCC_FELIX_SWITCH_TSN [=y]
| Type : tristate
| Prompt: TSN on FELIX switch driver
| Location:
| -> Device Drivers
| -> Network device support (NETDEVICES [=y])
| -> Ethernet driver support (ETHERNET [=y])
| -> Microsemi devices (NET_VENDOR_MICROSEMI [=y])
| -> Ocelot switch driver (MSCC_OCELOT_SWITCH [=y])
| -> FELIX switch driver (MSCC_FELIX_SWITCH [=y])
| Defined at drivers/net/ethernet/mscc/Kconfig:38
4.2.13.3
Basic TSN Configure examples on ENETC
The tsntool is an application configuration tool to configure the TSN capability. You can find files /usr/bin/tsntool and /usr/lib/
libtsn.so in the rootfs. Run tsntool to start the setting shell.
Device Drivers
Layerscape LS1028A BSP User Guide, Rev. 0.3, 04/2019
NXP Semiconductors
111
To Next Page
Loading...
