2.4.9 Human-machine interfaces
The following human-machine interfaces (HMI) are available on this device:
Table 2-10. HMI modules
Module Description
General purpose input/output (GPIO) Some general purpose input or output (GPIO) pins are capable of interrupt and
DMA request generation.
Capacitive touch sense input (TSI) Contains up to 16 channel inputs for capacitive touch sensing applications.
Operation is available in low-power modes via interrupts.
2.5 Orderable part numbers
The following table summarizes the part numbers of the devices covered by this
document.
Table 2-11. Orderable part numbers summary
Freescale part number CPU
frequency
Pin count Package Total flash
memory
RAM Temperature range
MKL25Z32VFM4 48 MHz 32 QFN 32 KB 4 KB -40 to 105 °C
MKL25Z64VFM4 48 MHz 32 QFN 64 KB 8 KB -40 to 105 °C
MKL25Z128VFM4 48 MHz 32 QFN 128 KB 16 KB -40 to 105 °C
MKL25Z32VFT4 48 MHz 48 QFN 32 KB 4 KB -40 to 105 °C
MKL25Z64VFT4 48 MHz 48 QFN 64 KB 8 KB -40 to 105 °C
MKL25Z128VFT4 48 MHz 48 QFN 128 KB 16 KB -40 to 105 °C
MKL25Z32VLH4 48 MHz 64 LQFP 32 KB 4 KB -40 to 105 °C
MKL25Z64VLH4 48 MHz 64 LQFP 64 KB 8 KB -40 to 105 °C
MKL25Z128VLH4 48 MHz 64 LQFP 128 KB 16 KB -40 to 105 °C
MKL25Z32VLK4 48 MHz 80 LQFP 32 KB 4 KB -40 to 105 °C
MKL25Z64VLK4 48 MHz 80 LQFP 64 KB 8 KB -40 to 105 °C
MKL25Z128VLK4 48 MHz 80 LQFP 128 KB 16 KB -40 to 105 °C
Orderable part numbers
KL25 Sub-Family Reference Manual, Rev. 3, September 2012
44 Freescale Semiconductor, Inc.
To Next Page
Loading...
