NXP Semiconductors PN5180 - 6 Annex A Rx Matrix XML input file examples; 6.1 Type A example without AWG control

NXP Semiconductors
AN11744
PN5180 Evaluation board quick start guide
AN11744 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved.
Application note Rev. 1.3 — 2 February 2018
COMPANY PUBLIC 371213 39 / 45
1. JP300 can be used to externally supply TVDD.
Figure 32. PN5180 jumper settings with external TVDD
6 Annex A Rx Matrix XML input file examples
6.1 Type A example without AWG control
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<!DOCTYPE Test SYSTEM "NNC_RxMatrix_Pn5180.dtd">
<!-- This is an example of a TypeA test script for PN5180 where
we acess registers by names -->
<Test
numberMaxOfPasses="10"
skipAfterFailures="4"
delayMS="0"
fieldReset="YES"
protocolType="RM_A_106"
>
<SendData shortFrame="YES" rxCRC="NO" txCRC="NO"
timeOutInUs="1000">
0x26
</SendData>
<ReadData invertedMaskBytes="0x00, 0x00">