NXP Semiconductors PN7462AU - 5.6 Debug interface

NXP Semiconductors
UM10883
PN7462 family Quick Start Guide - Development Kit
UM10883
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
32 of 120
5.6 Debug interface
The PNEV7462C board has SWD interface port (JP4 10-pin Cortex connector). The
LPC-Link 2 standalone debug probe connects to this interface via flat cable from J7 as
illustrated on the following picture.
Fig 34. LPC-Link2 debug probe connected to the PNEV7462C