PN7462 family Quick Start Guide - Development Kit
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
6.11 NFC Cockpit with AWG
6.11.1 NI VISA installation
The NFC Cockpit supports the control of a Keysight AWG (see [13]) via USB. As a
prerequisite, the USB driver and National Instruments VISA driver package [14] have to
be installed.
Remark: This NI VISA version does not conflict with the CTC Advanced WavePlayer tool.
Make sure that the .NET development support is installed, as shown in Fig 43.
(1) Install the .NET (IVI) development support!
Fig 43. NI VISA installation
6.11.2 AWG setup and test for type A @ 106
The Fig 44 shows a typical setup for a type A response. After connecting the AWG the
type A protocol with 106 kbit/s can be chosen. The sample rate defines the number of
samples per half of a subcarrier cycle.
To Next Page
Loading...
