PN7462 family Quick Start Guide - Development Kit
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
6.13 Secondary FW - EMVCo Loopback application
The FW might contain additional applications (see 6.3), which can then be started via the
Secondary FW tab.
The default Secondary FW application is:
EMVCo Loopback: Test application for EMVCo L1 certification
The EMVco Loopback (or other application) can be started by pressing the <Start
Secondary Firmware> button and the function can be stopped by pressing the <Stop
Secondary Firmware> button.
Fig 49. PN7462 family FW tab with EMVCo Loopback function
6.14 PN7462 family Scripting
The NFC Cockpit allows to use a simple script language to program own scripts for test
purpose. This feature is mainly developed for the CLRC663, and the number of
implemented commands for the PN7462 family IC is limited.
There is a sample script, which simply resets RF filed of the PN7462 family IC:
c:\nxp\NxpNfcCockpit_v<VERSION>\scripts\pn7462AU_RfOnOff.nncscript
To Next Page
Loading...
