PN7462 family Quick Start Guide - Development Kit
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
Fig 63. Project Workspace with all examples
8.6 Building projects
Building projects in a workspace can be started trough Quickstart Panel - ‘Build all
projects’ command. Alternatively, a single project can be selected in the “Project Explorer
View” and built separately. Note that building a single project may also start a build of
any associated library projects.
The project can be built as shown in the Fig 64.
To Next Page
Loading...
