PN7462 family Quick Start Guide - Development Kit
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
The project settings, compiler and link flags can be changed in the project properties
dialog. To open the project properties dialog, select appropriate project in the “Project
Explorer View” and click “Edit ‘selected-project’ project settings”.
Build result can be monitored on the build console Successful build Fig 66.
8.7 Running and debugging the example projects
This description shows how to run the PN7462AU “PN7462AU_ex_phExMain” example
application for the PN7462AU customer development board in debug mode. The same
basic principles will apply for all other examples. In cases where example will need
additional configuration this will be detailed described in the example description.
The PNEV7462B customer board needs to be connected to the host PC running the
MCUXpresso software via LPC-Link 2, as shown in Fig 67.
To Next Page
Loading...
