NXP Semiconductors PN7462AU - Features; Freertos Usage in this Example

NXP Semiconductors
UM10883
PN7462 family Quick Start Guide - Development Kit
UM10883
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
79 of 120
External p ower
sup ply
LPC -LIN K2
Fig 82. HW setup for the main example
9.2.2 Features
“phExMain” example is covering the following features:
Table 10. “phExMain” Example features
Feature
supported
CLIF Interface
Yes
CT Interface
Yes
NXP NFC Reader Library
Yes
CT Reader Library
Yes
FreeRTOS
Yes
Non RTOS
Yes
Standby mode
Yes
HIF/MIF Interface
No
9.2.3 FreeRTOS usage in this example
Example can be built in two configuration modes, with FreeRTOS and without FreeRTOS
support.
By setting precompile directive “#PHFL_HALAPI_WITH_RTOS” or
“#PHFL_HALAPI_NO_RTOS” the mode of the configuration is specified.
To build example in one or another mode, comment/uncomment proper directive in the
“APP_NxpBuild.h” file.
In case of FreeRTOS mode, 3 tasks are used to control application flow:
• System Task which switches between CLIF functionality and CT functionality and
handles system functions such as going to standby