PN7462 family Quick Start Guide - Development Kit
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
Fig 6. PNEV7462B board schematic (PN7462 part)
2.2.3 LPCXpresso block
This block provides expansion interface for LPCXpresso MCU board providing standard
LPCXpresso/m-bed expansion connector (DIL54). LPCXpresso SPIM and I2CM
interfaces are routed to the PN7462AU host interface selector.
Additionally, board features a USB micro B connector (X1) routed to the LPC board USB
interface and the LPC board reset circuit. Diagnostic LED1-4 are connected to LPC port
pins.
To Next Page
Loading...
