NXP Semiconductors PN7462AU - 9.3 PN7462 AU_ex_phExEMVCo (CLIF + CTIF functionality)

NXP Semiconductors
UM10883
PN7462 family Quick Start Guide - Development Kit
UM10883
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
89 of 120
9.3 PN7462AU_ex_phExEMVCo (CLIF + CTIF functionality)
The “phExEMVCo” is an example which implements the polling for the EMVCo contact
and contactless cards and implement reference EMV transaction.
Application is based on the NFC Reader Library, CT Library and be run with or without
FreeRTOS.
9.3.1 Demo setup
This section describes in detail the setup and execution environment required for the
“phExEMVCo” application.
The following things are required for setup:
1. PNEV7462B/C board
2. LPC-Link 2 board
3. Power adapter
4. Contact and contactless EMVCo card
External p ower
sup ply
LPC -LIN K2
Fig 87. HW Setup for the “phExEMVCo”example
9.3.2 Features
“phExEMVCo” example features:
Table 11. “phExEMVCo” Example features
Feature
supported
CLIF Interface
Yes
CT Interface
Yes
NXP NFC Reader Library
Yes
CT Reader Library
Yes
FreeRTOS
Yes