NXP Semiconductors PN7462AU - Pn7462 Au_Ex_ Phexct7816 (CT Functionality); Demo Setup; Features; ISO7816 Activation

NXP Semiconductors
UM10883
PN7462 family Quick Start Guide - Development Kit
UM10883
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
97 of 120
9.8 PN7462AU_ex_ phExCT7816 (CT functionality)
The “PN7462AU_ex_phExCt7816” example implements the CT functionality with CT
library support. Application use CT library APIs and perform same CT functionality as in
“PN7462AU_ex_phExMain” example with the only difference that for the transaction
static predefined packets are used. The example is built to work on a SCOSTA card.
PN7462AU_ex_phExCT7816 demonstrates the CT Protocol Lib + HAL API’s. After the
transactions, deactivation is performed.
Application does not implement CLIF and “Standby” functionality and it is not based on
the FreeRTOS.
9.8.1 Demo setup
In this example, the same setup is used as in “phExMain” example.
9.8.2 Features
“phExCT7816” example is covering next features:
Table 15. “phExCT7816” Example features
Feature
supported
CLIF Interface
No
CT Interface
Yes
NXP NFC Reader Library
No
CT Pal Library
Yes
FreeRTOS
No
Non RTOS
Yes
Standby mode
No
HIF/MIF Interface
No
9.8.3 ISO7816 activation
The example performs an ISO7816 activation and ISO7816 ATR parsing. Also, it
determines the protocol supported by the card and applies the protocol supported.
9.8.4 APDU transactions
The following APDU’s are sent after the activation of the card. If the card supports the
following APDU’s (e.g. SCOSTA), proper responses will come from the card.
1. Create MF
2. Create EF
3. Select EF
4. Write binary
5. Read binary
6. Delete EF