2.6.1 PCIe support
The T1040RDB supports evaluation of PCIe using any standard PCIe Gen 1/Gen 2 card.
2.6.2 SGMII support
The T1040RDB board supports evaluation of the SGMII protocol using the RTL8211DN
PHY.
The figure below shows the connectivity of the SGMII interface.
T1040
SGMII
MDIO/MDC
R
TL8211DN
Transformer
RJ-45 Port
EMI1
SGMII
Figure 2-6. SGMII connection
2.6.3 QSGMII support
The T1040RDB board supports evaluation of the QSGMII protocol using an F104S8A
four-port Ethernet PHY. The figure below shows the connectivity of the QSGMII
interface.
SerDes port
QorIQ T1040 Reference Design Board User Guide, Rev. 0, 06/2015
22 Freescale Semiconductor, Inc.