NXP Semiconductors QorIQ T1040 - 2.14 Serial port

T1040
USB1_UID
USB1_UDP
, UDM
USB1_VBUSCLMP
USB1USB2
USB2_VBUSCLMP
USB2_DRVVBUS
USB2_PWRFAULT
USB1_DRVVBUS
USB1_PWRFAULT
USB2_UDP, UDM
USB2_UID
IBIAS_REXT
INSTALLED: Host mode (default)
90 OHm diff.imp.
CMHD3595
USB Type A
CMHD3595
10K
1%
24MHz
USB CLK
USB CLKIN
90 OHm diff.imp.
USB Type A
INSTALLED: Host mode (default)
5V0
18.2K
51.1K
18.2K 51.1K
MIC2506YM
Figure 2-14. USB connection
2.14 Serial port
The T1040 processor has two UART controllers, which provide RS-232 standard
interconnection between the board and an external host. The serial connection is
configured to run at 115.2 kbit/s, with 8 bits, no parity, and one stop bit.
Serial port
QorIQ T1040 Reference Design Board User Guide, Rev. 0, 06/2015
30 Freescale Semiconductor, Inc.