Figure 2-19. T1040RDB
2.17.1 Connectors
The table below lists the various connectors on the T1040RDB platform.
Table 2-7. Connector on board
Reference Designators Used For Notes
J1 UDIMM
J3 COP/JTAG Used for debugging T1040
J5 SD card
J13(2 ports) UART
Table continues on the next page...
Chapter 2 Architecture
QorIQ T1040 Reference Design Board User Guide, Rev. 0, 06/2015
Freescale Semiconductor, Inc. 35
To Next Page
Loading...
