Table 2-7. Connector on board (continued)
J14(2 ports) Ethernet ports RGMII -> Copper
J15 (4 ports) Ethernet ports QSGMII -> Copper
J18 PCIe x4 Card Intended use is for PCIe cards that are
25 W or less
J19,J20 Mini-PCIe cards
J21 SATA
J22,J23 FXS ports
J24 FXO port
J30 Battery Holder
J34 CPU fan
J37 ATX power
J41 Dual Type A USB
J42 Ethernet port SGMII -> Copper
J43 TDM Riser card
J33,J44-J46 Case fan
2.17.2 Headers
The below table lists the various headers on the T1040RDB platform.
Table 2-8. Header on Board
Reference Designators Used For Notes
J26 Altera CPLD Header Used for programming the Altera CPLD
device
J28 IR36021 Header Used for programming IR36021
2.17.3 Jumper
The below table describes how jumpers are used on the T1040RDB platform:
Table 2-9. Jumper on board
Reference designator Description Status 1 Status 2
J9 PROG_SFP selection Mounted : Fuse Programming Un-mounted : normally
operate (default setting)
J10 PROG_MTR selection Mounted : Fuse Programming Un-mounted : normally
operate (default setting)
Table continues on the next page...
Connectors, headers, jumper, push buttons and LED
QorIQ T1040 Reference Design Board User Guide, Rev. 0, 06/2015
36 Freescale Semiconductor, Inc.
To Next Page
Loading...
