NXP Semiconductors S32K116 EVB - Jumper Settings Configuration

EXTERNAL USE
5
Jumper Settings
Jumper Configuration Description
J104 1-2
2-3 (Default)
Reset signal to OpenSDA, use to enter into
OpenSDA Bootloader mode
Reset signal direct to the MCU, use to reset
S32K116.
J107 1-2 (Default)
2-3
S32K116 powered by 12V power
source.
S32K116 powered by USB micro
connector.
J10 2-3 (Default)
1-2
MCU voltage 5v
MCU voltage 3.3v
J108 1-2 (Default) Select LIN master option
J15 1-2 (Default) Used for current measurement