NXP Semiconductors S32K148 - S32 K148-T-BOX RDB Features

2
S32K148-T-BOX RDB BLOCK
DIAGRAM
To achieve the maximum flexibility to be
T-BOX/GP-ECU Ref-Design/S32K148 EVB:
 BLE, GPS and 3G/4G select
independent Module and connect with
S32K148 via UART
 Add QSPI Nor-Flash, standalone
RTC and 3-aix Accelerator for T-Box
functions
 Extend a 100M-base TX1 automotive
ethernet via TJA1101 for both T-Box
connection and AVB evaluation (plus a
I
2
S audio Codec )
 SBC provides 5/3.3V power supply for
S32K148 and other onboard modules
and also expends 1 CAN and 2 LIN bus
 Select TJA1044 with SO-8 and TJA1043
with HVSON14 package to compatible
with Stinger
 Use a 23-pin ECU connector to route
all CAN/LIN/ENET bus and extend 2x
HS output, 2x PWM input capture and
2x Analog Input, enable it to work as a
GP-ECU
S32K148-T-BOX RDB FEATURES
 Support S32K148 with LQFP-144
or LQFP-176 pin package(default
mounted with LQFP-144 package)
 SBC UJA1132 with 2 LIN physical
layers and 1 CAN physical layer
 Integrate communication interfaces:
– 3x CAN with CAN-FD
– 3x UART(2 reused as LIN via SBC-
UJA113x)
– 1x 100M-base TX1 automotive
ethernet via TJA1101
– 1x I
2
S audio codec extend with
SGTL500 and support AVB
evaluation
 Integrate 8MB QSPI NOR Flash
memory(MX25L6433F)
 Provide T-BOX function module plugin
interfaces:
 1 UART BLE module
 1 UART GPS module
 1 UART 4G communication module
 2x user bottoms input
 2x touch sensor input
 1x RGB LED
 1x Potentiometer
 1x 3-axi accelerator(MMA8452Q) via
I
2
C
 1x stand-alone RTC chip(PCA85063)
 A 23-pin ECU connector, routing external
I/O signals including:
– 2x ADC input channels
– 2x HS PWM output channels
– 2x PWM input capture channels
– 3x CAN bus
– 2x LIN bus
– 1x 100M-base TX1 automotive
ethernet
 Compatible with S32K148EVB:
– Arduino™UNO footprint-compatible
with expansion “shield” support
– Can run all demo projects of SDK
 Voltage supply options for 3.3V or 5V
S32K148-T-BOX RDB BLOCK DIAGRAM
S32K148 T-BOX_GP-ECU RDB WITH ALL MODULES PLUGIN
S32K148-T-BOX REFERENCE DESIGN BLOCK DIAGRAM
GPS Module
MCU
S32K148
LQFP-144/176
3G/4G
Communication
Module
UART
I
2
C
8 MB QSPI Flash
External Memory
QSPI
TJA1101
ENET MIICAN/CAN-FD
Standalone
RTC Chip
I
2
C
VBAT/IGN +12 V
SBC
UJA1132
2x 5 V LDO
1x CAN PHY
2 x LIN PHY
8 x HVIO
3-axi
Accelerator
TJA1044
TJA1043
CAN/CAN-FD
SPI
UART
CAN
LIN
LIN
I
2
S
Audio Codec
SGTL5000
UART
BLE Module
2x PWM
5 V @ 500 mA
23-pin ECU connector
HS Driver
2x HS
Signal Conditional Circuit
2x Analog Input 2x PWM Input
2x ADC
2x Input Capture