NXP Semiconductors S32K312EVB-Q172 - 8 S32 K312 EVB-Q172 - Programming and Debug Interface; 8.1 RESET Switch and LED indicator

NXP Semiconductors
S32K312EVB-Q172 HWUM
S32K312EVB-Q172 | S32K312EVBQ172ND - Hardware User Manual
S32K312EVB-Q172
S32K312EVBQ172ND
HWUM
All Information provided in this document is subject to legal disclaimers
© NXP B.V. 2020. All rights reserved
NXP Semiconductors
REV A1 – 01/2022
Page 14 of 25
8 S32K312EVB-Q172 - Programming and Debug
Interface
8.1 RESET Switch and LED indicator
The RESET switch [SW2] provides for manual application of the RESET input signal. The S32K3 MCU will drive the RESET signal to
reset the EVB board peripherals. The RESET LED indicator [D22] will be ON for the duration of the RESET signal. This operation indicates
the S32K312 MCU is in the Reset state.
Figure 10. S32K312EVB-Q172 – RESET Switch