NXP Semiconductors S32K312EVB-Q172 - 11.2 User Pushbuttons

NXP Semiconductors
S32K312EVB-Q172 HWUM
S32K312EVB-Q172 | S32K312EVBQ172ND - Hardware User Manual
S32K312EVB-Q172
S32K312EVBQ172ND
HWUM
All Information provided in this document is subject to legal disclaimers
© NXP B.V. 2020. All rights reserved
NXP Semiconductors
REV A1 – 01/2022
Page 20 of 25
11.2 User Pushbuttons
There are 2 push-buttons active to high (pulled low, driven to VDD_HV_A and VDD_HV_B), the push button switches (SW6 and SW5)
connected to MCU ports. The switches are connected as follows:
Figure 18. S32K312EVB-Q172 – User Pushbuttons
Figure 19. S32K312EVB-Q172 – User Pushbuttons
TP108
TPAD
VDD_HV_B_PERH
SW5
1825967-2
1
2
3
4
C74
0.22UF
0402
C189
0.22UF
0402
VDD_HV_B_PERH
GND
GND
USER_SW0 Page[5]
USER_SW1 Page[5]
R260 10K
0201
R261
10K
0201
R262 10K
0201
TP114
TPAD
R259
10K
0201
TP112
TPAD
SW6
1825967-2
1
2
3
4
C194
0.22UF
0402
C73
0.22UF
0402
TP107
TPAD