NXP Semiconductors S32K324 - Debug S32 K324 Dual-Core with CM7_1 Disabled; CM7_1 Disabled Boot Configuration

8
EXTERNAL USE
Debug S32K324 Project when “CM7_1_ENALBE=0”
• Assumption:
−CM7_1 is NOT enabled during boot. Debugger cannot work before it is
launched. CM7_1 is started in CM7_0 application code.
• Use the same Debug Configuration
as debugging “CM7_1_ENABLE=1”.
• Procedure:
− Download CM7_0 elf and CM7_1 elf
into the flash with Group Launch