NXP Semiconductors
S32K344
White Board
Figure 29. RF and LF circuit block diagram
The RF circuit and LF circuit on the White Board are shown in the following figure.
Figure 30. RF and LF circuit on the White Board
8.10 Audio
The audio codec SGTL5000 can be used together with ethernet circuits to evaluate AVB
application. The device CS2100CP is used to synchronize the clock between MCU and
SGTL5000. MCU transmits/receives audio data with SGTL5000 via SAI_0 interface
and configures the audio codec via LPI2C_0 interface. We provide a 12-pin header for
connecting external multiple-channel audio codec.
UM11919 All information provided in this document is subject to legal disclaimers. © 2023 NXP B.V. All rights reserved.
User manual Rev. 1.0 — 11 April 2023
COMPANY PUBLIC 26 / 32
To Next Page
Loading...
