NXP Semiconductors S32K3X4EVB-Q172 - Block Diagram; Features

NXP Semiconductors
S32K3X4EVB-Q172 HWUM
S32K3X4EVB-Q172 | S32K3X4EVB-S172 - Hardware User Manual
S32K344EVB-Q172 | -S172 HWUM
All Information provided in this document is subject to legal disclaimers
© NXP B.V. 2020. All rights reserved
NXP Semiconductors
REV A – 10/2021
Page 4 of 31
3 S32K3X4EVB-Q172 | -S172 - Block Diagram
Figure 1. S32K3X4EVB-Q172 | -S172 – Block diagram
4 S32K3X4EVB-Q172 | -S172 - Features
IMPORTANT
• Verify and download the last version of this document in http://www.nxp.com
• Before the S32K344 Customer Evaluation board is used or power is applied, please fully read this
user manual. An incorrect configuration in the board may cause a damage irreparable on the
component, MCU or EVB. Power must be removed from the EVB prior to:
- Removing or placing some component or measurement
- Re-configuring the board jumpers