NXP Semiconductors UM11483 - Supported RF Standards; Wi-Fi Features

NXP Semiconductors
UM11483
Getting Started with NXP Wireless Modules for i.MX 8M-Quad Platforms
UM11483 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 28 September 2020
15 / 39
4.1.1.4 Supported Bluetooth features
Table 8. AW-CM358MA supported Bluetooth features
Bluetooth Feature Description
Bluetooth classic general features Bluetooth Class 1.5 and Class 2 support
Scatternet support
Maximum of seven simultaneous ACL connections
Automatic Packet Type Selection
Bluetooth - 2.1 to 5.0 Specification Support
Bluetooth packet type supported ACL (DM1, DH1, DM3, DH3, DM5, DH5, 2-DH1, 2-DH3, 2-DH5, 3-DH1, 3-DH3, 3-
DH5)
SCO (HV1, HV3)
eSCO (EV3, EV4, EV5, 2EV3, 3EV3, 2EV5, 3EV5)
Bluetooth profiles supported Bluetooth A2DP Source/Sink
Bluetooth AVRCP Controller
Bluetooth HFP Dev/Gateway
Bluetooth OPP Server/Client
Bluetooth HID
Bluetooth specification 2.1 Support Erroneous Data Reporting
Encryption Pause and Resume
Extended Inquiry Response
Link Supervision Timeout Changed Event
Non-Automatically-Flushable Packet Boundary Flag
Secure Simple Pairing
Sniff Sub Rating
Security Mode 4
Bluetooth specification 3.0 support Enhanced Power Control
HCI Read Encryption Key Size Command
Bluetooth specification 4.0 support Low Energy Link Layer
Bluetooth LE generic features 16 Bluetooth LE connections (master role)
Bluetooth LE – 1Mbps Support
Bluetooth LE profile support Bluetooth LE GATT
Bluetooth LE HID
Bluetooth LE 4.0 support Low Energy Physical Layer
Low Energy Link Layer
Enhancements to HCI for Low Energy
Low Energy Direct Test Mode
Bluetooth LE 4.1 support Low duty Cycle Directed Advertising
Bluetooth LE Dual Mode Topology
Bluetooth LE Privacy v1.1
Bluetooth LE Link Layer Topology
Bluetooth LE 4.2 support Bluetooth LE Secure Connection
Bluetooth LE Link Layer Privacy v1.2
Bluetooth LE Data Length Extension
Link Layer Extended Scanner Filter Policies