NXP Semiconductors
UM11483
Getting Started with NXP Wireless Modules for i.MX 8M-Quad Platforms
UM11483 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 28 September 2020
30 / 39
5.6.5 Plug the wireless module
Use the following to plug the module into the connector slots of i.MX 8M Quad board.
• For AW-CM358MA, connect the module into the M.2 connector of the i.MX 8M Quad
board and screw.
• For AW-CM358-uSD, plug the module into the SDIO card slot of the i.MX 8M Quad
board.
[ 3632.632050] mmc1: new ultra high speed SDR104 SDIO card at address
0001