NXP Semiconductors
UM11490
Feature Configuration Guide for NXP-based Wireless Modules on i.MX 8M Quad EVK
4.5 Human Interface Device Profile
This section provides the configuration steps to connect a Bluetooth keyboard and/or
mouse. The Human Interface Device Profile is used to establish the connection.
Use the following steps to configure Human Interface Device (HID) Profile to connect with
the Bluetooth device.
Connect with a remote Bluetooth device that supports Human Interface Device
profile
Refer to Section 4.1 "Scan, pair and connect to Bluetooth classic/Bluetooth LE"
Verify the Human Interface Device Profile capability of the connected Bluetooth
device
[Rapoo E6700]# info 6C:5D:63:20:40:AA
Device 6C:5D:63:20:40:AA
Name: Rapoo E6700
Alias: Rapoo E6700
Class: 0x002540
Icon: input-keyboard
Paired: yes
Trusted: yes
Blocked: no
Connected: yes
LegacyPairing: no
UUID: Service Discovery Server (00001000-0000-1000-8000-00805f9b34fb)
UUID: Human Interface Device (00001124-0000-1000-8000-00805f9b34fb)
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
Modalias: usb:v0A5Cp8502d011B
[Rapoo E6700]#
The connected keyboard can be used as a normal keyboard now.
UM11490 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
User manual Rev. 2 — 29 January 2021
67 / 88
To Next Page
Loading...