NZXT H1 - Regulatory Information

NZXT GLOBAL WARRANTY POLICY
This NZXT Global Warranty Policy governs the sale of products by NZXT to you.
Any replacement product will be covered under warranty for the remainder of the warranty
period or thirty days, whichever is longer. Proof of purchase is required for warranty service.
I. WARRANTY LENGTH
New NZXT Product
Warranty Length for Parts
Computer Cases
2 Years
Temperature Meters
2 Years
Fans
2 Years
Lighting
2 Years
Accessories
2 Years
Kraken M Coolers
3 Years
Motherboards
4 Years
C Series Gold PSU
10 Years
C Series Bronze PSU
5 Years
Kraken X/Z Coolers
6 Years
Mini ITX Case with PSU, AIO, and Riser Card
3-year warranty on case, riser card, and AIO.
10-year warranty on PSU.
Refurbished NZXT Product
Warranty Length for Parts
All NZXT Certified Refurbished Products
1 Years
II. WHO IS PROTECTED
The Warranty covers only NZXT products purchased by the original consumer.
III. WHAT IS AND IS NOT COVERED
Please note that our warranty is not an unconditional guarantee. If the product, in NZXT's
reasonable opinion, malfunctions within the warranty period, NZXT will provide you at its sole
discretion with a repaired or replacement product, either new or refurbished, with a similar
function that is equal or greater in value depending on supply. Our warranty does not cover the
following:
any product or serial number/warranty sticker modification applied without permission from
NZXT;
any damage that is not a manufacturing defect;
damage, deterioration or malfunction resulting from: accident, abuse, misuse, neglect, fire,
water, lightning, or other acts of nature, unauthorized product modification or failure to follow
instructions included with the product;
improper installation, unauthorized alterations or modifications, or repair or attempted repair by
anyone not authorized by NZXT;
shipping or transport damage (claims must be made with the carrier);
normal wear and tear.
NZXT does not warrant that this product will meet your requirements. It is your responsibility
to determine the suitability of this product for your purpose. For NZXT Store orders, we cover
two way return shipping for all exchanges and returns. For all other authorized dealers, NZXT
Support does not cover return shipping and only covers one way shipping from NZXT back to
the end user for exchanges. Two way expedited shipping is provided for all PSUs covered under
the Less Than Three program, indiscriminate of purchase location, provided the location is an
approved NZXT reseller.
IV. EXCLUSION OF DAMAGES (DISCLAIMER)
NZXT's sole obligation and liability under this warranty is limited to the repair or replacement
of a defective product with either a new or refurbished product with a similar function that is
equal or greater in value at our option. NZXT shall not, in any event, be liable for any incidental
or consequential damage, including but not limited to damages resulting from interruption of
service and loss of data, business, or for liability in tort relating to this product or resulting from
its use or possession.
INFORMACIÓN IMPORTANTE SOBRE SEGURIDAD
¡PELIGRO DE DESCARGA ELÉCTRICA!
1. Siga todas las advertencias de seguridad e instrucciones del fabricante durante la instalación. De lo
contrario, podría dañar el sistema o la fuente de alimentación, y provocar lesiones graves o la muerte.
2. En la fuente de alimentación existen tensiones elevadas. No abra la caja de la fuente de alimentación ni
intente repararla, no contiene piezas que el usuario pueda reparar.
3. Este producto está diseñado para su uso en interiores.
4. No utilice la fuente de alimentación cerca de agua ni en entornos muy húmedos o con temperaturas altas.
5. No instale la unidad cerca de fuentes de calor tales como radiadores, medidores de temperatura,
estufas u otros aparatos que produzcan calor.
6. No introduzca ningún objeto en el área del ventilador o ventilación abierta de la fuente de alimentación.
7. No modifique los cables y/o conectores incluidos con esta fuente de alimentación.
8. Si esta fuente de alimentación utiliza cables modulares, utilice solo cables proporcionados por el
fabricante.
9. El conector de alimentación principal de 24 pines dispone de un conector de 4 pines extraíble. Este
conector de 4 pines no es un conector P4 o ATX de 12V. No fuerce este cable en el enchufe P4 o ATX
+12V de la placa base.
10. El incumplimiento de cualquiera de las instrucciones del fabricante o de estas instrucciones de
seguridad anulará de inmediato todas las garantías.
INFORMAZIONI IMPORTANTI SULLA SICUREZZA
AVVERTENZA: PERICOLO DI SCOSSE ELETTRICHE
1. Effettuare l'installazione in conformità a tutte le istruzioni del produttore e gli avvisi sulla
sicurezza. Il mancato rispetto di questa procedura potrebbe causare danni al proprio
alimentatore o sistema e potrebbe provocare lesioni gravi o anche la morte di persone.
2. Nell'alimentatore sono presenti tensioni elevate. Non aprire il case o la custodia
dell'alimentatore, né tentare di riparare l'alimentatore; non contiene componenti riparabili o
sostituibili dall'utente.
3. Il prodotto è stato progettato solo per uso interno.
4. Non usare l'alimentatore nelle vicinanze di acqua, a temperature elevate o in ambienti con
umidità elevata.
5. Non installare vicino a fonti di calore quali termosifoni, valvole di regolazione del calore, stufe o
altri apparecchi che producono calore.
6. Non inserire oggetti nelle fessure di ventilazione aperte o nella griglia della ventola
sull'alimentatore.
7. Non modificare i cavi e/o i connettori in dotazione con questo alimentatore.
8. Se l'alimentatore utilizza cavi modulari, utilizzare solo cavi forniti dal produttore.
9. Il connettore di alimentazione principale a 24 pin è dotato di un connettore a 4 pin estraibile. Il
connettore a 4 pin non è un connettore di tipo P4 o ATX da 12 V. Non forzare l'inserimento del
cavo nella presa P4 o ATX a +12 V della scheda madre.
10. La mancata conformità a qualsiasi istruzione del produttore e/o a qualsiasi presente istruzione
sulla sicurezza renderà immediatamente nulle tutte le garanzie.
INFORMAÇÕES IMPORTANTES DE SEGURANÇA
CUIDADO, RISCO DE CHOQUE ELÉTRICO!
1. Instale de acordo com todas as instruções do fabricante e com os avisos de segurança. Não
fazê-lo poderá resultar em danos à fonte de alimentação ou ao sistema, isso pode causar lesões
graves ou morte.
2. Há alta tensão na fonte de energia. Não abra a caixa da fonte de alimentação ou tente reparar a
fonte de alimentação. Não há componentes que possam ser reparados pelo usuário.
3. Este produto foi projetado apenas para uso em ambientes internos.
4. Não use a fonte de alimentação perto de água ou em ambientes com alta temperatura ou alto
nível de umidade.
5. Não instale perto de fontes de calor como radiadores, saídas de ar quente, fogões ou outros
aparelhos que produzam calor.
6. Não insira objetos na ventilação aberta ou na área da grade da ventoinha da fonte de
alimentação.
7. Não modifique os cabos e/ou conectores incluídos com esta fonte de alimentação.
8. Se esta fonte de alimentação usa cabos modulares, utilize apenas os cabos fornecidos pelo
fabricante.
9. O conector de alimentação de 24 pinos tem um conector de 4 pinos removível. O conector de 4
pinos não é um conector P4 ou ATX 12 V. Não force o cabo no soquete P4 ou ATX +12 V da placa-
mãe.
10. O não cumprimento de qualquer uma das instruções do fabricante e/ou qualquer uma dessas
instruções de segurança anulará imediatamente todas as garantias.
V. LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied, including but not limited to those of
merchantability or fitness for a particular purpose. The duration of implied warranties is limited to
the warranty length specified in Paragraph I.
VI. TO OBTAIN TECHNICAL SUPPORT
If you have already referenced your product owner's manual and still need help, you may contact us
by phone at +1 (800) 228-9395, by email at service@nzxt.com, or visit the NZXT Support site at nzxt.
com/customer-support.
VII. HOW TO OBTAIN A WARRANTY SERVICE FROM NZXT
To receive a warranty service for your product when purchased directly from NZXT, you must submit
a request via the NZXT Support site outlining the problem. If a technician deems the product
defective or requiring testing, you will be required to provide a copy of your proof of purchase, which
will enable you to submit a Return Merchandise Authorization “RMA” request.
Once approved, you`ll receive an RMA number, upon which you will be asked to ship the defective
item back to NZXT with the RMA number clearly marked or labelled on the package. NZXT
recommends that appropriate measures are taken to safeguard the product from damage during
shipping.
VIII. APPLICABLE LAW AND ADDITIONAL LEGAL RIGHTS FOR CONSUMERS
This warranty gives you specific legal rights. These conditions are governed and construed in
accordance with the laws of California (with exception of its conflict of law provisions), and the
application of the United Nations Convention of Contracts for the International Sale of Goods is
expressly excluded. The non-exclusive jurisdiction of the courts of California is agreed, which means
that you may bring a claim to enforce your consumer protection rights in connection with this Global
Warranty in the country which you have your habitual residence where you may have additional
rights. These rights may vary.
For original consumers who are covered by consumer protection laws or regulations in their country,
state, or province of purchase or, if different, their country, state, or province of residence, the
benefits conferred by this warranty are in addition to all rights and remedies conveyed by such
consumer protection laws and regulations. To the extent that liability under such consumer laws
can be limited, NZXT’s liability is limited, and its sole option, to repair or replacement, either new or
refurbished, with a similar function that is equal or greater in value depending on supply.
In the United Kingdom:
• For NZXT products sold to customers in the UK, during the expected lifespan of your product
your legal rights entitle you to the following:
> Up to 30 days: if your goods are faulty, then you can get an immediate refund.
> Up to six months: if your goods can't be repaired or replaced, then you're entitled to a full
refund, in most cases.
> Up to six years: if your goods do not last a reasonable length of time you may be entitled to
some money back.
• If the person seeking to rely on the guarantee is not the original consumer, the NZXT Warranty
will cover the product in relation to that person provided that they are able to provide proof of
the transfer of the benefit of the guarantee from the original consumer.
• The implied warranties under the Consumer Rights Act 2015 says that your goods must be as
described, fit for all purposes for which such goods are usually supplied, and of satisfactory
quality.
In the EU:
• If you are a consumer and have your habitual residence in the EU, you additionally enjoy the
protection afforded to you by provisions that cannot be derogated from by agreement by virtue of
the law where you have your habitual residence.
IX. WARRANTY SERVICE FROM RESELLERS
In the event that a warranty service is sought, you must provide proof of purchase (store receipt or
invoice) in order to receive the service and if deemed necessary, repair or replacement product.
In North America:
Within the first 60 days after purchase, please return your product (or for power supplies installed
within our enclosures, just the failed power supply) to your dealer or reseller for a replacement. If
the product is still within warranty and you can no longer return it to your dealer, please contact
NZXT Customer Support (see above) for assistance and instructions. NZXT will not accept returns
without prior approval and an RMA number.
In Europe:
Within the first year after purchase, please return your product (or for power supplies installed
within our enclosures, just the failed power supply) to your dealer or reseller for a replacement. If
the product is still within warranty and you can no longer return it to your dealer, please contact
NZXT Customer Support (see above) for assistance and instructions. NZXT will not accept returns
without prior approval.
In Australasia:
Within the first two years after purchase, please return your product (or for power supplies installed
within our enclosures, just the failed power supply) to your dealer or reseller for a replacement. If
the product is still within warranty and you can no longer return it to your dealer, please contact
NZXT Customer Support (see above) for assistance and instructions. NZXT will not accept returns
without prior approval.
The cost of shipping will be borne at the first instance by you; however, if the purchased item is
defective, NZXT will reimburse reasonable postage or transportation of costs.
Outside North America, Europe, and Australasia:
If your product needs to be returned within the warranty period, please contact the retailer or
distributor from whom you purchased the product.
X. NZXT.COM STORE RETURNS/EXCHANGE POLICY
Eligible products under this NZXT Warranty qualify for a full refund or exchange only with an
authorized RMA number and if the item is returned to the NZXT.com store inventory within 30 days
of purchase. Returns are not allowed beyond 30 days of the purchase date. The NZXT.com Store
reserves the right to deny any return or exchange. Refunds will be credited to the original method of
payment. To initiate a return, simply submit a request via NZXT support site.
SUPPORT AND SERVICE
SUPPORT AND SERVICE
If you have any questions or problems with the NZXT product you purchased, please don’t hesitate to
contact us using our support system. support.nzxt.com
Please include a detailed explanation of your problem and your proof of purchase. For comments
and suggestions, you can e-mail our design team, designer@nzxt.com. Lastly we would like to thank
you for your support by purchasing this product.
For more information about NZXT, please visit us online. NZXT Website: nzxt.com
SOPORTE Y SERVICIO
Si tiene preguntas o problemas con el producto NZXT que usted compró, no dude en ponerse en
contacto con service@nzxt.com y suministrar una explicación detallada de su problema así como
su prueba de compra. Puede hacer consultas sobre piezas de repuesto en support.nzxt.com. Para
comentarios y sugerencias, escriba un mensaje de correo electrónico a nuestro equipo de diseño:
designer@nzxt.com. Gracias por comprar un producto NZXT. Para más información acerca de NZXT,
visítenos en línea. Página web de NZXT: nzxt.com
SUPPORT ET SERVICE
Si vous avez des questions ou des problèmes avec le produit NZXT que vous avez acheté, n’hésitez
pas à contacter service@nzxt.com avec une description détaillée de votre problème et votre preuve
d’achat. Vous pouvez aussi commander des pièces de remplacement auprès support.nzxt.com. Pour
les commentaires et les suggestions, envoyez un email à notre équipe de design, designer@nzxt.
com. Merci d'avoir acheté ce produit de NZXT. Pour plus d'informations sur NZXT, visitez notre site
Web. Site Web de NZXT : nzxt.com
KUNDENDIENST UND SERVICE
Falls Fragen oder Probleme bezüglich Ihres NZXT-Produktes auftreten, wenden Sie sich bitte mit
einer detaillierten Problembeschreibung und Ihrem Kaufbeleg an service@nzxt.com. Ersatzteile
können Sie unter support.nzxt.com anfragen. Kommentare und Anregungen senden Sie bitte
per designer@nzxt.com an unser Designteam. Vielen Dank, dass Sie ein NZXT-Produkt erworben
haben. Weitere Informationen über NZXT erhalten Sie im Internet. NZXT-Webseite: nzxt.com
ASSISTENZA E SERVIZIO
In caso di dubbi o problemi con il prodotto NZXT acquistato, non esitate a contattarci utilizzando il
nostro sistema di assistenza. support.nzxt.com
Includere una spiegazione dettagliata del problema e la prova di acquisto. Per commenti e
suggerimenti, siete pregati di inviare un messaggio al nostro team di progettisti, all'indirizzo:
designer@nzxt.com. Infine, vogliamo ringraziarvi del vostro supporto con l'acquisto di questo
prodotto. Per altre informazioni su NZXT, visitate il nostro sito. Sito NZXT: nzxt.com
ASSISTÊNCIA E MANUTENÇÃO
Caso tenha questões ou problemas com o produto NZXT adquirido, não hesite em contactar-nos
através do endereço service@nzxt.com fornecendo a explicação detalhada do seu problema e a
prova de compra. Poderá solicitar peças de substituição através do endereço support.nzxt.com.
Para comentários e sugestões, contacte a nossa equipa de design através do endereço de e-mail,
designer@nzxt.com. Obrigado por ter adquirido um produto NZXT. Para mais informações acerca da
NZXT, visite-nos online. Web site da NZXT: nzxt.com
СЛУЖБА ПОДДЕРЖКИ И ОБСЛУЖИВАНИЯ
          NZXT
  : service@nzxt.com      
.     ,   : support.nzxt.com.  
      : designer@nzxt.com.  
   NZXT.      NZXT   
-. - NZXT: nzxt.com
지원 및 서비스
구입한 NZXT 제품과 관련하여 질문 또는 문제가 있을 경우, 당사의 지원 시스템 (support.nzxt.com) 을 사용하여 문
의하십시오.
문제를 자세히 기술하고 구매 증빙을 제출하십시오. 의견 또는 제안 사항이 잇을 경우 당사 설계 팀에 designer@nzxt.
com
으로 이메일을 보내십시오. 마지막으로 이 제품을 구입하여 당사를 응원해 주셔서 감사합니다. NZXT에 대해 자세
히 알려면 온라인으로 방문하십시오. NZXT 웹사이트: nzxt.com
サポートおよびサービス
購入されました
NZXTの製品に関するご質問または問題は、問題の詳細および購入の証明を添えて、ご遠
慮なく
service@nzxt.comまでご連絡ください。 交換部品はsupport.nzxt.comまでお尋ねください。ご
意見およびご提案は弊社設計チーム、
designer@nzxt.com までメールを送信してください。NZXT製品
をご購入いただきましてありがとうございます。
NZXTに関する詳細は、インターネット上のウェブサイトを
ご覧ください。NZXT ウェブ サ イト: nzxt.com
支持和服务
如果有任何疑问或者在使用 NZXT 产品的过程中遇到任何问题,欢迎联络 service@nzxt.com,联络时请
提供关于问题的详细说明及购买凭证。您可以向 support.nzxt.com 查询更换部件。如有任何意见或
建议,欢迎致信我们的设计团队,电子邮件地址是 designer@nzxt.com。感谢您购买 NZXT 产品。有关
NZXT 的更多信息,请造访我们的在线网站。NZXT 网站：nzxt.com
支援和服務
如果在使用NZXT 產品的過程中有遇到任何問題或疑問，歡迎聯繫 service@nzxt.com， 並請提供問題
的詳細敘述及購買證明。您可以透過 support.nzxt.com 查詢更換部件。如有任何意見或建議，歡迎來
信與設計團隊聯繫 designer@nzxt.com。最後，感謝您購買 NZXT 產品。有關 NZXT 的更多信息，請
訪問我們的網站。NZXT 網站：nzxt.com
>
Visit nzxt.com/warranty and support.nzxt.com for information on warranty coverage and service.
> Visite el sitio Web nzxt.com/warranty y support.nzxt.com para obtener información sobre la cobertura y el servicio
de la garantía.
> Visitez nzxt.com/warranty et support.nzxt.com pour les informations de la couverture de la garantie et du service.
> Informationen zu Geltungsbereich und Service der Garantie finden Sie unter support.nzxt.com und nzxt.com/
warranty.
> Visitare il sito nzxt.com/warranty e support.nzxt.com per informazioni sulla copertura e sul servizio della garanzia.
> Visite nzxt.com/warranty e support.nzxt.com para obter informações sobre a cobertura da garantia e assistência.
>       .  - nzxt.com/warranty  support.nzxt.com.
>
제품 보증 범위와 서비스 정보를 확인하시려면 nzxt.com/warranty 또는 support.nzxt.com 을 방문해 주시기 바랍니다.
> 保証範囲およびサービスに関する情報については、support.nzxt.com と nzxt.com/warranty にアクセスしてください。
> 请造访 nzxt.com/warranty 和 support.nzxt.com 了解保修范围和服务的信息。
> 請訪問 nzxt.com/warranty 和 support.nzxt.com 了解產品保固範圍和更多服務訊息。
限用物质及元素列表 / 限用物質及元素清單
產品名稱: 機箱, H1系列
限用物質及其化學符號
單元 鉛(Pb) 鎘(Cd) 汞(Hg) 六價鉻(Cr
+6
) 多溴聯苯(PBB) 多溴聯苯醚(PBDE)
PCBA ○ ○ ○ ○ ○ ○
連接器 ○ ○ ○ ○ ○ ○
線材 ○ ○ ○ ○ ○ ○
金屬結構件 ○ ○ ○ ○ ○ ○
塑膠結構件 ○ ○ ○ ○ ○ ○
風扇 ○ ○ ○ ○ ○ ○
塗料 ○ ○ ○ ○ ○ ○
交換式電源供應器 — ○ ○ ○ ○ ○
一體式水冷 0.1wt% 0.01wt% ○ ○ ○ ○
備考1. “超出0.1wt%”及”超出0.01wt%”係指限用物質之百分比含量超出百分比含量基準值。
備考2. “○” 係指該項限用物質之百分比含量未超出百分比含量基準值。
備考3. “
— ” 係指該項限用物質為排除項。
IMPORTANT SAFETY INFORMATION
CAUTION ELECTRIC SHOCK HAZARD!
1. Install in accordance with all manufacturer instructions and safety warnings. Failure to do so may
result in damage to your power supply or system, and may causes serious injury or death.
2. High voltages are present in the power supply. Do not open the power supply case or attempt to
repair the power supply; there are no user-serviceable components.
3. This product is designed for indoor use only.
4. Do not use the power supply near water, or in high temperature or high humidity environments.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
that produce heat.
6. Do not insert any objects into the open ventilation or fan grill area of the power supply.
7. Do not modify the cables and/or connectors included with this power supply.
8. If this power supply uses modular cables, use only manufacturer supplied cables.
9. The 24-pin main power connector has a detachable 4-pin connector. This 4-pin connector is not a P4
or ATX 12V connector.Do not force this cable in the P4 or ATX +12V socket on motherboard.
10. Failure to comply with any manufacturer instructions and/or any of these safety instructions will
immediately void all warranties and guarantees.
INSTALLATION
INSTALACIÓN
INSTALLATION
INSTALLIEREN
INSTALLAZIONE
INSTALAÇÃO

설치
取り付け
安装
安裝
STEP 3STEP 1
Connect the 20+4-pin power to the motherboard.
Conecte la alimentación de 20+4 pines a la placa base.
Branchez le connecteur à 20+4 broches sur la carte mère.
Schließen Sie das 20+4-polige Netzkabel an das Mainboard an.
Collegare l'alimentazione a 20+4 pin alla scheda madre.
Conecte a alimentação de 20+4 pinos à placa-mãe.
 20+4      .
20+4 핀 파워를 마더보드에 연결합니다.
20+4 ピン電源用コネクタをマザーボードに接続します。
将 20+4 针电源连接到主板。
將 20+4 針腳電源線接到主機板。
STEP 2
Connect the 4+4-pin CPU power.
Conecte la alimentación de CPU de 4+4 pines.
Branchez le(s) connecteur(s) d'alimentation processeur à 4+4 broches.
Schließen Sie das 4+4-polige CPU-Kabel an.
Collegare l'alimentazione CPU a 4+4 pin.
Conecte a alimentação da CPU de 4+4 pinos.
 4+4-   .
4+4핀 CPU 전원을 연결합니다.
4+4ピン CPU 電源用コネクタを接続します。
连接 4+4 针 CPU 电源。
接上 4+4 針腳 CPU 電源線。
Connect the PCI-e power to your graphics card as required.
Conecte la alimentación de PCI-e a su tarjeta gráfica según sea necesario.
Branchez le(s) connecteur(s) d'alimentation PCI-e à votre carte graphique, en fonction de
vos besoins.
Verbinden Sie ggf. das PCI-e-Kabel mit der Grafikkarte.
Collegare l'alimentazione PCI-e alla scheda grafica secondo la configurazione in uso.
Conecte a alimentação PCI-e às suas placas gráficas conforme necessário.
   PCI-e     .
요구에 따라 PCI-e 전원을 그래픽 카드에 연결합니다.
必要に応じて PCI-e 電源用コネクタをグラフィックスカードに接続します。
按要求将 PCI-e 电源连接到显卡。
如有需要，將 PCI-e 電源線接到顯示卡。
STEP 4
Connect the SATA and peripheral power as needed.
Conecte la alimentación periférica y de SATA según sea necesario.
Branchez les connecteurs SATA et périphériques, en fonction de vos besoins.
Schließen Sie SATA- und Peripheriekabel nach Bedarf an.
Collegare l'alimentazione SATA e per le periferiche secondo la configurazione in uso.
Conecte as alimentações SATA e para periféricos conforme necessário.
  SATA      .
필요한 경우 SATA 및 주변기기 전원을 연결합니다.
必要に応じて SATA およびペリフェラル電源用コネクタを接続します。
按需连接 SATA 和外围设备电源。
如有需要，接上 SATA 和周邊設備電源線。
STEP 5
Connect the AC power cord to the wall and turn on the power switch.
Conecte el cable de alimentación de CA a la pared y encienda el interruptor.
Branchez le câble d'alimentation CA à la prise murale et mettez le bloc d'alimentation sous
tension.
Verbinden Sie das Netzkabel mit einer Steckdose und schalten Sie das Gerät ein.
Collegare il cavo di alimentazione CA alla presa elettrica a parete e accendere l'interruttore
dell'alimentazione.
Conecte o cabo de alimentação CA à tomada e ligue o botão de alimentação.
       .
AC전원 코드를 벽 콘센트에 연결한 다음 전원 스위치를 켭니다.
AC電源コードをコンセントに接続し、電源スイッチをオンにします。
将交流电源线连接到机箱壁并打开电源开关。
將 AC 電源線插到牆上插座，打開電源開關。
SFX 750W Gold Fully Modular Power Supply
Fan: 92mm FDB Silent Fan
80 Plus Gold Certified
AC Input Full Range
Operating Temperature: 0-40 °C
MTBF @ 25 °C, excl. fan 100,00 hours
Protection: OVP, UVP, OPP, SCP, OCP, OTP
C750 Gold mini
PRODUCT TYPE
Switching Power Supply
RATING
100V-240V 12A-6A 50Hz-60Hz
DC OUTPUT
+3.3V +5V +12V +5Vsb -12V
MAX LOAD
20A 20A 62.5A 2.5A 0.3A
MAX OUTPUT POWER
120W 750W 16.1W
TOTAL POWER
750 W
Fuente de alimentación totalmente modular SFX Gold de 750W
Ventilador: ventilador silencioso FDB de 92mm
Con certificación 80 Plus Gold
Entrada CA de rango completo
Temperatura de funcionamiento: 0-40 °C
Tiempo medio entre fallos a 25°C, exc. ventilador: 100,00horas
Protección: OVP, UVP, OPP, SCP, OCP, OTP
C750 Gold mini
TIPO DE PRODUCTO
Fuente de alimentación conmutada
VALORES NOMINALES
100V-240V 12A-6A 50Hz-60Hz
SALIDA CC
+3,3 V +5 V +12 V +5 V en espera –12 V
CARGA MÁX.
20 A 20 A 62,5 A 2,5 A 0,3 A
POTENCIA DE SALIDA
MÁX.
120W 750W 16.1W
POTENCIA TOTAL
750 W
Alimentation SFX 750W Gold entièrement modulaire
Ventilateur: Ventilateur silencieux de 92mm à palier fluide dynamique
Certification 80 Plus Gold
Entrée CA à gamme étendue
Température de fonctionnement: 0-40°C
Temps moyen entre pannes à 25°C, sauf ventilateur 100000heures
Protection: Surtensions, sous-tensions, surcharges, courts-circuits, surintensités, surchauffes
C750 Gold mini
TYPE DE PRODUIT
Alimentation commutée
PUISSANCE NOMINALE
100V-240V 12A-6A 50Hz-60Hz
SORTIE CC
+3,3V +5V +12V + 5Vsb - 12V
CHARGE MAX
20A 20A 62,5A 2,5A 0,3A
PUISSANCE DE SORTIE
MAX
120W 750W 16.1W
PUISSANCE TOTALE
750 W
Fonte de alimentação totalmente modular SFX 750W Gold
Ventoinha: Ventoinha silenciosa FDB 92 mm
Certificado 80 Plus Gold
Entrada CA de gama completa
Temperatura de funcionamento 0-40 °C
MTBF (tempo médio sem falhas) a 25 °C, excl. ventoinha 100,00 horas
Proteção: OVP, UVP, OPP, SCP, OCP, OTP
C750 Gold mini
TIPO DE PRODUTO
Fonte de alimentação comutada
CLASSIFICAÇÃO
100V-240V 12A-6A 50Hz-60Hz
SAÍDA CC
+3,3V +5V +12V +5Vsb -12V
CARGA MÁXIMA
20A 20A 62,5A 2,5A 0,3A
POTÊNCIA MÁX. DE SAÍDA
120W 750W 16.1W
POTÊNCIA TOTAL
750 W
    SFX Gold 750 
:    92 
   80 Plus Gold
    
 : 0-40 °C
     25 °C (  ) 100 . 
:  ,  ,     ,  ,
 , 
C750 Gold mini
 
  

100 -240  12 A-6 A 50 -60 
 

+3,3  +5  +12 
+ 5  

-12 
 
20A 20A 62,5 A 2,5 A 0,3 A

 
120  750  16,1 
 
750 
Vollständig modulares Netzteil SFX 750W Gold
Lüfter: Geräuscharmer Lüfter 92mm FDB
80-Plus-Gold-zertifiziert
AC-Eingang Vollbereich
Betriebstemperatur: 0–40°C
MTBF bei 25°C 100.000 Stunden, ausgenommen Lüfter
Schutz: OVP, UVP, OPP, SCP, OCP, OTP
C750 Gold mini
PRODUKTTYP
Schaltnetzteil
NENNWERTE
100V-240V 12A-6A 50Hz-60Hz
GLEICHSTROM-AUSGANG
+3,3V +5V +12V +5Vsb -12V
MAX. LAST
20A 20A 62,5A 2,5A 0,3A
MAX.
AUSGANGSLEISTUNG
120W 750W 16.1W
GESAMTLEISTUNG
750 W
Alimentazione completamente modulare SFX 750W Gold
Ventola: ventola silenziosa FDB 92 mm
Certificato 80 Plus Gold
Gamma completa input AC
Temperatura di funzionamento: 0-40 °C
MTBF @ 25 °C, escl. ventola 100,00 ore
Protezione: OVP, UVP, OPP, SCP, OCP, OTP
C750 Gold mini
TIPOLOGIA PRODOTTO
Alimentatore switching
VALUTAZIONE
100V-240V 12A-6A 50Hz-60Hz
USCITA DC
+3.3 V +5 V +12 V + 5Vsb -12 V
CARICO MAX.
20 A 20 A 62,5 A 2.5 A 0,3 A
POTENZA MAX. DI USCITA
120W 750W 16.1W
POTENZA TOTALE
750 W
SFX 750W Gold 풀 모듈러 파워 서플라이
팬
: 92mm FDB 사일런트 팬
80 Plus Gold 인증
AC 입력 전체 범위
작동
온도: 0~40°C
MTBF @ 25
°C, 팬 제외 1만 시간
보호
: OVP, UVP, OPP, SCP, OCP, OTP
C750 Gold mini
제품 유형
스위칭 파워 서플라이
정격
100V-240V 12A-6A 50Hz-60Hz
DC 출력
+3.3V +5V +12V +5Vsb -12V
최대 부하
20A 20A 62.5A 2.5A 0.3A
최대 출력 전력
120W 750W 16.1W
총 전력
750 W
SFX 750W Gold完全モジュラー電源
ファン：
92mm FDBサイレントファン
80 Plus Gold認証
AC入力フルレンジ
動作温度：
0〜40°C
MTBF @ 25
°C（ フ ァ ン 除 く ）、100,000時間
保 護：
OVP、UVP、OPP、SCP、OCP、OTP
C750 Gold mini
製品タイプ
スイッチング電源
定格
100V-240V 12A-6A 50Hz-60Hz
DC出力
+3.3V +5V +12V +5Vsb -12V
最大負荷
20A 20A 62.5A 2.5A 0.3A
最大出力電力
120W 750W 16.1W
総電力
750 W
SFX 750W 金牌全模块化电源
风扇：92mm FDB 静音风扇
80 Plus 金牌认证
交流输入满量程
工作温度：0-40 °C
MTBF @ 25 °C，不包括风扇 100,00 小时
保护：OVP、UVP、OPP、SCP、OCP、OTP
C750 Gold mini
产品类型
开关电源
评级
100V-240V 12A-6A 50Hz-60Hz
DC 输出
+3.3V +5V +12V +5Vsb -12V
最大负载
20A 20A 62.5A 2.5A 0.3A
最大输出功率
120W 750W 16.1W
总功率
750 W
SFX 750W 金牌全模組化電源供應器
風扇：92mm FDB 靜音風扇
80 Plus 金牌認證
全範圍交流輸入
工作溫度：0-40 °C
溫度在 25 °C 時，MTBF 可達 100,00 小時（風扇除外）
保護電路設計：OVP、UVP、OPP、SCP、OCP、OTP
C750 Gold mini
産品類型
開關電源供應器
額定值
100V-240V 12A-6A 50Hz-60Hz
DC 輸出
+3.3V +5V +12V +5Vsb -12V
最大負載
20A 20A 62.5A 2.5A 0.3A
最大輸出功率
120W 750W 16.1W
總功率
750 W
POWER SUPPLY SPECIFICATION
ESPECIFICACIONES DE LA FUENTE DE ALIMENTACIÓN
CARACTÉRISTIQUES DE L’ALIMENTATION
SPEZIFIKATION DER STROMVERSORGUNG
SPECIFICHE DI ALIMENTAZIONE
ESPECIFICAÇÕES DA FONTE DE ALIMENTAÇÃO
   
파워
서플라이 및 사양
電源仕様書
電源仕様
電源供應器的規格
产品名称: 机箱, H1系列
有害物质
部件名称 铅(Pb) 镉(Cd) 汞(Hg) 六价铬(Cr
+6
) 多溴联苯(PBB) 多溴联苯醚(PBDE)
PCBA ○ ○ ○ ○ ○ ○
连接器 ○ ○ ○ ○ ○ ○
线材 ○ ○ ○ ○ ○ ○
金属结构件 ○ ○ ○ ○ ○ ○
塑胶结构件 ○ ○ ○ ○ ○ ○
风扇 ○ ○ ○ ○ ○ ○
涂料 ○ ○ ○ ○ ○ ○
交换式电源供应器
✕
○ ○ ○ ○ ○
一体式水冷
✕ ✕
○ ○ ○ ○
本表格依据SJ/T 11364的规定编制。
◯ : 表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572规定的限量要求下。
✕ : 表示该有害物质至少在该部件的某一均值材料中的含量超出GB/T 26572官定的限量要求。
REGULATIONS
Designed in Los Angeles, California. Made in China 中國製造 中国制造
The devices within NZXT H1 Mini-ITX case complies with Part 15 of the FCC Rules individually.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation. Comply with CAN ICES-3 (B) / NMB-3 (B)
PSU model no. within H1: PS-7G1B
Liquid Cooling System model no. within H1: RL-KR14H-01
Terms and Conditions:
The maximum ambient temperature is 50℃, the maximum normal operating temperature of the
radiator (coolant) is 60℃, and the maximum abnormal temperature of the radiator (coolant) is 70℃.
This equipment is not suitable for use in locations where children are likely to be present.
INSTALACIÓN DEL USB DEL CONTROLADOR DE VENTILADOR
INSTALLATION DU PORT USB DE LA COMMANDE DE VENTILATEUR
INSTALLIEREN DER LÜFTERSTEUERUNG USB
INSTALLAZIONE DEL CONTROLLO VENTOLA USB
INSTALAÇÃO DO USB DO CONTROLADOR DA VENTOINHA
 USB  
팬 컨트롤러 USB 설치하기
ファンコントロ ー ラ USBの取り付け
安装风扇控制器 USB
安裝風扇控制器 USB
CONEXIÓN DE LA BOMBA
RACCORDEMENT DE LA POMPE
ANSCHLIESSEN DER PUMPE
COLLEGAMENTO DELLA POMPA
LIGAÇÃO DA BOMBA
 
펌프 연결하기
ポンプの接続
连接泵
連接水泵
INSTALLING THE FAN CONTROLLER USB
CONNECTING THE PUMP TACH
중요 한전 정보
주의: 감전의 위험이 있음!
1. 제조업체의 지침을 따르고 안전 경고에 유의하며 설치하십시오. 그렇지 않으면 파워 서플라이 또는
본체가 손상을 입거나 심각한 부상 2. 또는 사망으로 이어질 수 있습니다.
3.
파워 서플라이는 높은 전압의 전류가 흐릅니다. 파워 서플라이의 케이스를 열거나 파워 서플라이를 수
리하려고 하지 마십시오. 사용자가 수리할 수 있는 부품이 없습니다.
4.
이 제품은 실내용으로 제작되었습니다.
5.
물이 있는 장소나 고온 또는 다습한 환경에서는 파워 서플라이를 사용하지 마십시오.
라디에이터, 온풍구, 난로 등 열을 분출하는 장치 근처에 설치하지 마십시오.
6.
파워 서플라이의 통풍구 또는 팬 그릴에 이물질을 삽입하지 마십시오.
7.
파워 서플라이와 함께 제공된 케이블 또는 커넥터를 개조하지 마십시오.
8.
파워 서플라이가 모듈식 케이블을 사용하는 경우, 제조업체에서 제공한 케이블만 사용하십시오.
9. 24
핀 메인 파워 커넥터에는 탈부착이 가능한 4핀 커넥터가 장착되어 있습니다. 해당 4핀 커넥터는 P4
또는 ATX 12V 커넥터와는 다릅니다. 이 케이블을 마더보드에 있는 P4 또는 ATX 12V 소켓에 강제로 연
결하지 마십시오.
10.
제조업체의 지침이나 안전 지침을 따르지 않으면 보증과 보장 사항이 폐지됩니다.
安全に関する重要な情報
注意：感電の危険があります！
1. 製造元によるすべての指示と安全に関する警告に従って取り付けてください。従わなかった場合、電源装置またはシ
ステムが損傷したり、重大なけがや死亡の原因になることがあります。
2. 電源装置には高圧電流が流れています。電源装置のケースを開けたり、電源装置を修理しようとしないでください。
お客様ご自身で修理可能なコンポーネントはありません。
3. この製品は屋内での使用のみを想定して設計されています。
4. 電源装置を水の近くや高温多湿の環境で使用しないでください。
5. ラジエーター、ヒーター、ストーブなど熱源の近くには設置しないでください。
6. 電源装置の排気口や通気口に物を挿入しないでください。
7. この電源装置に付属のケーブルまたはコネクタを改造しないでください。
8. この電源装置でモジュラーケーブルを使用する場合は、製造元が提供するケーブル以外は使用しないでください。
9. 24 ピン主電源コネクタには、取り外し可能な 4 ピンコ ネクタ が あります。この 4 ピンコネクタは P4 または ATX
12V
コネクタで は 10. ありません。このケーブルをマザーボードの P4 または ATX + 12V ソケットに差し込まないで
ください。
製造元による指示またはこの安全に関する指示のいずれかの事項を遵守しなかった場合、すべての保証は直ちに無
効になります。
重要安全信息
注意触电危险！
1. 请按照所有制造商说明和安全警告进行安装。否则，可能会对您的电源或系统造成损害，甚至可能
导致人员伤亡。
2. 电源中存在高压。切勿打开电源外壳或者尝试修复电源；没有用户可维护的部件。
3. 本产品仅限室内使用。
4. 切勿在有水或高温或高湿度环境下使用电源。
5. 安装位置切勿靠近任何热源，如散热器、热量记录器、烤箱或其他发热的家电。
6. 切勿在电源的通风口或风扇格栅区域中插入任何物体。
7. 切勿修改此电源随附的电缆和/或接头。
8. 如果此电源使用模块化电缆，请仅使用制造商提供的电缆。
9. 24 针主电源连接器有一个可拆卸的 4 针接口。此 4 针接口不是 P4 或 ATX 12V 接口。切勿将此电缆强
行插入到主板的 P4 或 ATX +12V 插槽中。
10. 如不遵守任何制造商说明和/
或这些安全说明中的任一条，所有担保和保证将立即失效。
重要安全資訊
小心觸電危險！
1. 請遵照所有製造商的指示和安全警告進行安裝。否則可能導致電源供應器或系統損壞，且可能造成
嚴重傷亡。
2. 電源供應器存在高壓電。請勿開啟電源供應器機殼或嘗試維修電源供應器；所有元件皆不得由使用
者自行維修。
3. 本產品的設計僅限室內使用。
4. 請勿在近水處，或者高溫或高濕度環境中使用電源供應器。
5. 請勿安裝在任何靠近熱源處 (如散熱器、熱調節器、爐具或其他會產生高溫的裝置)。
6. 請勿將任何物體插入電源供應器的開放式通風處或風扇網。
7. 請勿改裝此電源供應器隨附的連接線和/或接頭。
8. 如果此電源供應器是使用模組化連接線，請僅使用製造商所提供的連接線。
9. 24 針腳的主電源線接頭具有卸除式 4 針腳接頭。此 4 針腳接頭並非 P4 或 ATX 12V 接頭。請勿強行將
此纜線插入主機板上的 P4 或 ATX +12V 插座。
10. 若未能遵守任何製造商的指示和/或安全指示，所有保固與保證將立即失效。
INSTALLATION
INSTALACIÓN
INSTALLATION
INSTALLIEREN
INSTALLAZIONE
INSTALAÇÃO

설치
取り付け
安装
安裝
ORIENTACIÓN DE LOS TUBOS
DISPOSITION DES TUBES
SCHLAUCHAUSRICHTUNG
ORIENTAMENTO TUBO
ORIENTAÇÃO DO TUBO
 
튜브 방향
チューブの向き
软管定位
水管方向
TUBE ORIENTATION
Position tubes outwards before closing!
Check for cable and tube clearance when closing
Do not fold or Crimp tubes
INFORMATIONS IMPORTANTES DE SÉCURITÉ
ATTENTION: RISQUE D'ÉLECTROCUTION!
1. L'installation doit être effectuée conformément aux instructions du fabricant et aux avertissements
de sécurité. Une installation non conforme peut entraîner des dommages à votre bloc
d'alimentation ou système électrique, et entraîner des blessures graves, voire la mort.
2. Le bloc d'alimentation contient des tensions élevées. N'ouvrez pas le boîtier du bloc d'alimentation
et ne tentez pas de le réparer; aucun de ses composants n'est réparable.
3. Ce produit est conçu pour une utilisation en intérieur uniquement.
4. N'utilisez pas le bloc d'alimentation à proximité d'eau, à des températures élevées ou dans des
environnements très humides.
5. Ne l'installez pas à proximité de sources de chaleur telles que radiateurs, registres, poêles ou autres
appareils produisant de la chaleur.
6. N'insérez aucun objet dans l'orifice ou la grille de ventilation du bloc d'alimentation.
7. Ne modifiez pas les câbles et/ou connecteurs inclus avec ce bloc d'alimentation.
8. Si ce bloc d'alimentation utilise des câbles modulaires, utilisez uniquement ceux fournis par le fabricant.
9. Le connecteur d'alimentation principal à 24 broches est équipé d'un connecteur amovible à 4
broches. Ce connecteur à 4 broches n'est pas un connecteur P4 ou ATX 12V. Ne forcez pas ce câble
dans la prise P4 ou ATX +12V de la carte-mère.
10. Toute non conformité aux instructions du fabricant et/ou à l'une de ces consignes de sécurité aura
pour conséquence l'annulation immédiate des garanties.
WICHTIGE SICHERHEITSINFORMATIONEN
ACHTUNG STROMSCHLAGGEFAHR!
1. Installieren Sie das Gerät gemäß den Anweisungen des Herstellers und den Sicherheitshinweisen.
Andernfalls kann es zu Schäden an Ihrem Netzteil oder System und zu schweren oder tödlichen
Verletzungen kommen.
2. Im Netzteil ist Hochspannung enthalten. Sie dürfen das Gehäuse des Netzteils weder öffnen noch zu
reparieren versuchen; es beinhaltet keine Komponenten, die vom Benutzer gewartet werden können.
3. Dieses Produkt ist nur für den Gebrauch in Innenräumen vorgesehen.
4. Verwenden Sie das Netzteil nicht in der Nähe von Wasser oder bei hohen Temperaturen oder in
Umgebungen mit hoher Luftfeuchtigkeit.
5. Montieren Sie das Gerät nicht neben Hitzequellen wie Heizkörpern, Wärmespeichern, Öfen oder
anderen Geräten, die Wärme erzeugen.
6. Stecken Sie keine Gegenstände in die offene Belüftung oder das Lüftergitter des Netzteils.
7. Nehmen Sie keine Modifikationen an den Kabeln und/oder Steckverbindern vor, die im Lieferumfang
dieses Netzteils enthalten sind.
8. Falls es sich um ein Netzteil mit modularen Kabeln handelt, dürfen Sie ausschließlich vom
Hersteller bereitgestellte Kabel verwenden.
9. Der 24-polige Hauptstromanschluss ist mit einem abnehmbaren 4-poligen Steckverbinder
ausgestattet. Dieser 4-polige Steckverbinder ist kein P4- oder ATX-12-V-Steckverbinder. Stecken Sie
diese Kabel nicht mit Gewalt in die P4- oder ATX-12V-Buchse des Mainboards.
10. Bei Nichteinhaltung der Anweisungen des Herstellers und/oder dieser Sicherheitshinweise erlischt
die Gültigkeit von Gewährleistungen und Garantien mit sofortiger Wirkung.
ВАЖНАЯ ИНФОРМАЦИЯ О БЕЗОПАСНОСТИ
ОПАСНОСТЬ ПОРАЖЕНИЯ ЭЛЕКТРИЧЕСКИМ ТОКОМ!
1. Installieren Sie das Gerät gemäß den Anweisungen des Herstellers und den Sicherheitshinweisen.
Andernfalls kann es zu Schäden an Ihrem Netzteil oder System und zu schweren oder tödlichen
Verletzungen kommen.
2. Im Netzteil ist Hochspannung enthalten. Sie dürfen das Gehäuse des Netzteils weder öffnen noch zu
reparieren versuchen; es beinhaltet keine Komponenten, die vom Benutzer gewartet werden können.
3. Dieses Produkt ist nur für den Gebrauch in Innenräumen vorgesehen.
4. Verwenden Sie das Netzteil nicht in der Nähe von Wasser oder bei hohen Temperaturen oder in
Umgebungen mit hoher Luftfeuchtigkeit.
5. Montieren Sie das Gerät nicht neben Hitzequellen wie Heizkörpern, Wärmespeichern, Öfen oder
anderen Geräten, die Wärme erzeugen.
6. Stecken Sie keine Gegenstände in die offene Belüftung oder das Lüftergitter des Netzteils.
7. Nehmen Sie keine Modifikationen an den Kabeln und/oder Steckverbindern vor, die im Lieferumfang
dieses Netzteils enthalten sind.
8. Falls es sich um ein Netzteil mit modularen Kabeln handelt, dürfen Sie ausschließlich vom
Hersteller bereitgestellte Kabel verwenden.
9. Der 24-polige Hauptstromanschluss ist mit einem abnehmbaren 4-poligen Steckverbinder
ausgestattet. Dieser 4-polige Steckverbinder ist kein P4- oder ATX-12-V-Steckverbinder. Stecken Sie
diese Kabel nicht mit Gewalt in die P4- oder ATX-12V-Buchse des Mainboards.
10. Bei Nichteinhaltung der Anweisungen des Herstellers und/oder dieser Sicherheitshinweise erlischt
die Gültigkeit von Gewährleistungen und Garantien mit sofortiger Wirkung.
V6
Scan the QR code or visit manuals.nzxt.com/h1
to view or download the full manual.
NZXT, Inc./ 15736 E. Valley Blvd, City of Industry, CA 91744, USA
NZXT Europe GmbH/ Industriering Ost 66 | 47906 Kempen | Germany
+1 (800) 228-9395 / service@nzxt.com / nzxt.com
CAMBIO DEL SOPORTE DE RETENCIÓN
CHANGEMENT DE LA BASE DE SUPPORT
AUSTAUSCHEN DER HALTERUNG
SOSTITUZIONE DELLA STAFFA DI TENUTA
TROCA DA BRAÇADEIRA DE RETENÇÃO
  
리텐션 브라켓 교체하기
リテンションブラケットの交換
更换扣具
更換固定托架
CHANGING THE RETENTION BRACKET
PREPARACIÓN DEL SOPORTE DE RETENCIÓN
PRÉPARATION DE LA BASE DE SUPPORT
VORBEREITEN DER HALTERUNG
PREPARAZIONE DELLA STAFFA DI TENUTA
PREPARAÇÃO DA BRAÇADEIRA DE RETENÇÃO
  
리텐션 브라켓 준비하기
リテンションブラケットの準備
准备扣具
準備固定托架
PREPARING THE RETENTION BRACKET
INSTALACIÓN DEL BLOQUE DE AGUA
INSTALLATION DE L’ÉCHANGEUR À EAU
INSTALLIEREN DES KÜHLBLOCKS
INSTALLAZIONE DEL BLOCCO DELL'ACQUA
INSTALAÇÃO DO BLOCO DE ÁGUA
  
워터블럭 설치하기
ウォーターブロックの取り付け
安装水冷头
安裝水箱
INSTALLING THE WATER BLOCK
AMD SOCKETAMD SOCKETAMD SOCKET
AMD Socket
AM5, AM4
1
J
2
1 2 3 4
H
J
I
1
2
Socket
75mm x 75mm
Intel 1200/115X
78mm x 78mm Intel 1700
INSTALACIÓN DEL BLOQUE DE AGUA
INSTALLATION DE L’ÉCHANGEUR À EAU
INSTALLIEREN DES KÜHLBLOCKS
INSTALLAZIONE DEL BLOCCO DELL'ACQUA
INSTALAÇÃO DO BLOCO DE ÁGUA
  
워터블럭 설치하기
ウォーターブロックの取り付け
安装水冷头
安裝水箱
INSTALLING THE WATER BLOCK
75mm
75mm
1
H
2
INTEL SOCKET
1700 or 1200/115X