What to do if the Oase Aquamax Eco 4000 CWS water flow is insufficient?
If the Oase Water Pump's water flow is insufficient, the strainer casing or satellite filter might be clogged, or the hose is blocked, kinked, or has excessive friction. You should clean the strainer casing and satellite filter, clean or replace the hose if needed, check the hose for kinks and replace it if necessary, and reduce the hose length to minimize friction.
What to do if Oase Water Pump unit switches off quickly?
If your Oase Water Pump unit switches off after a short running period, it could be due to a clogged strainer casing or the unit running dry. To resolve this, clean the strainer casing and check the supply line.
How to fix Oase Water Pump when it does not perform its suction function?
If the Oase Water Pump isn't performing its suction function, it might be due to no mains voltage or a blocked/running dry impeller. Check the mains voltage and clean/check the supply lines.
General| Max Flow Rate | 4000 l/h |
|---|---|
| Power Consumption | 45 W |
| Pump Type | Submersible |
| Cable Length | 10 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Hose Connection | 1 1/2" |
| Inlet/Outlet Diameter | 1 1/2" |
To Next Page