Oase FiltoSmart Thermo 200 User Manual (English)

Questions and Answers:

P
Philip TownsendAug 8, 2025
Why is the water flow insufficient in my Oase Water Filtration System?
- K
  kristin38Aug 8, 2025
  If the water flow is insufficient in your Oase Water Filtration System, several factors could be responsible: * The filter housing or impeller unit might be soiled: Clean them. * The impeller unit could be worn: Replace it. * The flow might be incorrectly set: Correct the setting. * The foam filter, activated carbon, or ceramic substrate may be dirty: Clean them. * The suction basket could be clogged: Clean the suction basket. * The pipework might be soiled: Clean the suction unit, flow-out unit, and hoses.
C
Charles NolanAug 19, 2025
What to do if my Oase Water Filtration System does not start up?
- H
  huffkaraAug 19, 2025
  If your Oase Water Filtration System doesn't start, consider these potential causes: * **No mains voltage:** Check the mains voltage. * **Impeller unit blocked:** Clean it. * **Excessive height difference:** Reduce the height difference between the top edge of the aquarium and the suction unit. * **Low water level:** Top up the water.
K
Kristen KellyAug 29, 2025
How to improve the filtering performance of my Oase Water Filtration System?
- W
  Willie NixonAug 29, 2025
  If your Oase Water Filtration System has insufficient filtering performance, it might be due to: * A soiled foam filter: Clean it. If it's worn, replace it. * A soiled ceramic substrate: Clean it. If it's worn, replace it. * Exhausted activated carbon: Replace it.