OBERON Arc Flash Suit User Manual

Oberon Company ▪ 800-322-3348 ▪ service@oberoncompany.com ▪ www.oberoncompany.com
4
Oberon User Guide
Arc Flash Suits
Bib-Overalls: Ensure fabric
inside/out is not ripped,
torn, no holes, other
damage or contamination.
Check suspenders, inspect
for signs of excessive wear
and conrm no vsbe
sns o damae. Conrm
buckles are operable and
sspender srap s a
inside of the adjustment
mechanism. Inspect cinch
strap(s) for hook and loop
seal.
Ventilation System:
Perform system check by
turning fan on. Replace
batteries if needed. Check
fan connection to coupling,
ensure fully engaged into
locked position. Fan unit
fully secured inside pocket,
loop or strap (located at
back).
Hard Cap: Check shield
adapters, ensure no cracks
and correcy ed nsde
cap side slots. Inspect for
cracks, shell not out of date
and suspension adjusting
mechanism works.
Coat: Ensure fabric inside/
out is no ripped, torn,
no holes, other damage
or contamination. Check
zipper and/or hook and
oop cosre conrm no
visible signs of damage.
Hood: Inspect hood
window inside/out for
excessive scratching,
cracks or other damage;
replace if necessary.
Ensure rubber washers
are seated on fastening
pins. Ensure fabric inside/
out is not ripped, torn, no
holes or other damage or
contamination.
How to Perform a Visual Pre-Inspection of an Oberon Arc Flash Suit
Coat, Bib-Overall, Hood, Ventilation System & Light
Suit Pictured: TCG40™ Series
Oberon Company ▪ 800-322-3348 ▪ servce@oberoncompany.com ▪ www.oberoncompany.com
Oberon User Guide
Arc Flash Suit Storage, Use, Care, & Maintenance

OBERON Arc Flash Suit Specifications

General

Brand	OBERON
Model	Arc Flash Suit
Category	Welding Accessories
Language	English